JVC VN-C215V4U manual Quitting the Built-in Viewer

Page 42

Operation

Operation of Built-in Viewer (continued)

Quitting the Built-in Viewer

To quit, press the [Close] button at the top right of the window.

Click [Close].

●To restart the built-in viewer, launch the Internet Explorer and enter the URL of the built-in viewer in the address field.

For example, if the IP address of VN-C215V4U is 192.168.0.2, enter as follows: http://192.168.0.2/cgi-bin/c215viewing.cgi

●After the Security Warning screen appears, press the [OK] button to proceed.

42

Image 42

Contents Fixed IP Dome Camera VN-C215V4USTART-UP Guide Safety Precautions Important SafeguardsFor USA and Canada Business users Other Countries outside the European Union Dear CustomerSehr geehrter Kunde, sehr geehrte Kundin Page Main Features Contents Operating Environment Copyrights of video MaintenanceOthers Saving EnergyName and Function of Parts Camera unitCamera unit/Inside the camera Power supply/Alarm signal cable a PgReset Reset button StrapInside the camera Zoom adjustment ring Iris Level Iris level adjustment dialFocus adjustment ring Lens sectionMonitoring Via Built-in Viewer FeaturesAlarm Saving Jpeg images to the FTP server at regular intervalsRestrictions on Clients Control via customized application softwareOverall Procedures Mounting the CameraMounting Method SetupSelecting Mounting Method Mounting on a ceilingRemove the outer case ConnectionRemove the inner dome Loosen the pan fastening screw Image adjustment Mounting Mounting the Dome Cover Mount the fall-prevention wire on Configure image settings. a PgHitch the fall-prevention wire that was Fall-prevention wire is not suppliedTurn the camera in the clockwise direction Tighten the Camera Fastening Screws and secure the cameraWind the waterproof tape. a Pg Connecting Mount by allowing the cable to exit from the sideMounting the camera to the electrical box Mounting Power Connection Using the PoEWhat is PoE Power over Ethernet? Connecting to the DC12 V power supply About the power cable120 190 When connecting to a computer Alarm Input/Output Cable Connection When connecting to a hub LAN Cable ConnectionImage adjustment Adjusting the camera shooting direction Adjusting field angle, focus and brightnessBrightness adjustment Field angle adjustmentFocus adjustment Mounting the Dome CoverNetwork Requirements System configuration required for setting IP address IP Address SettingsSetting IP address with the default VN- C215V4U settings a Assigning an IP address from the Dhcp server IP Address setting at the computer Click StartClick OK on the Local Area Connection Properties screen Example http//192.168.0.2 Enter the user name and password login as an administrator Basic page with the IP address settings appears Top page of VN-C215V4U appearsWhen the IP address of VN-C215V4U is known When the IP address of VN-C215V4U is unknownOperation of Built-in Viewer Setting Up the Internet Explorer Http//192.168.0.2 Viewer is installed and launched Installing the built-in viewerEnter the user name and password Http//192.168.0.2/cgi-bin/c215viewing.cgiScreen Configuration of Built-in Viewer Quitting the Built-in Viewer Shortcut for Built-in Viewer Enter the URL of the built-in viewer in the URL fieldAttachments/Accessories SpecificationsLAN Specifications GeneralDimension Unit mminches SR55Page Page Camera