JVC GR-DVL9800 specifications EN21, To Delete Unwanted Still Images, To Remove The Shutter Sound

Snapshot mode with no frame

There is the sound of a shutter closing.

EN21

To Delete Unwanted Still Images . . .

.... when unwanted still images are stored in the

MultiMediaCard or its memory is full, refer to “Deleting Images” (☞ pg. 51) and delete unwanted still images.

To Remove The Shutter Sound . . .

.... when you do not want to hear the shutter sound, set

BEEP/TALLY to “OFF” on the Menu Screen

(☞ pg. 30, 31). The sound is no longer heard from the speaker.

NOTES:

●Even if “DIS” is set to “ON” (☞ pg. 32), the Stabiliser will be disabled.

●If Snapshot recording is not possible, “PHOTO” blinks when SNAPSHOT is pressed.

●If Programme AE with special effects (☞ pg. 40) is engaged, certain modes of Programme AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks.

●If shooting is not performed for approx. 5 minutes when the Power Switch is set to “ ” or “ ” and power is supplied from the battery pack, the camcorder shuts off automatically to save power. To perform shooting again, close the LCD monitor and re-open it. When using the viewfinder, push back it in and pull it out again.

●The Motor Drive mode (☞ pg. 18) is disabled when the Shooting Mode Dial is set to “VGA” or “XGA”.

●To reduce the Red-Eye effect in the subject’s eyes when the flash fires, ☞ pg. 34.

●When a headphone set is connected to the PHONE connector, the shutter sound is not heard from the speaker.

●Still images taken are compliant to DCF (Design rules for Camera File systems). They do not have any compatibility with devices which are not compliant to DCF.

●In the XGA mode, images shot using a 800,000-pixel Progressive Scan CCD (effective area: 720,000 pixels, 962 x 774 pixels) are converted and stored in the XGA mode file size (1024 x 768 pixels).