JVC GR-DVL9800 specifications Feature Slow-Motion Playback, Feature Frame-By-Frame Playback

70ENUSINGTHEREMOTECONTROLUNIT

(cont.)

Remote sensor

Zoom Buttons	Up Button
SHIFT	Down
Left or SLOW	Button
Rewind Button	PLAY

PAUSE

Right or SLOW		STOP
Forward Button	RM-V716U
	(provided)
Normal playback	Press T

To move image, press (Right) while keeping SHIFT held down.

FEATURE: Slow-Motion Playback

PURPOSE:

To allow slow-speed search in either direction.

OPERATION:

1)To change from normal to Slow-Motion Playback, press SLOW (9or 0) more than approx. 2 seconds. After

approx. 1 minute in Slow Rewind or approx. 2 minutes in Slow Forward, normal playback resumes.

■To stop Slow-Motion Playback, press PLAY (4).

NOTES:

●You can also engage Slow-Motion Playback from Still Playback by pressing SLOW more than approx. 2 seconds.

●During Slow-Motion Playback, due to digital image processing, the picture may take on a mosaic effect.

●After SLOW (9 or 0) is pressed and held, the still image may be displayed for a few seconds, followed by a blue screen for a few seconds. This is not a malfunction.

●There may be a small margin between the slow-motion playback start point you chose and the actual start point for Slow-Motion Playback.

●During Slow-Motion Playback, there will be distur- bances in video and the picture may seem unstable, especially with steady images. This is not a malfunc- tion.

●During Slow-Motion Playback, press PAUSE (6) to pause playback.

FEATURE: Frame-By-Frame Playback

PURPOSE:

To allow frame-by-frame search.

OPERATION:

1)To change from normal to Frame-By-Frame Playback, press SLOW (0) repeatedly for forward or SLOW (9) repeatedly for reverse. Each time it is pressed, the frame is played back.

NOTE:

You can also engage Frame-By-Frame Playback from Still Playback by pressing SLOW (9 or 0) repeatedly.

FEATURE: Playback Zoom

PURPOSE:

To magnify the recorded image up to 10X at any time during playback.

OPERATION:

1)Press PLAY (4) to find the scene of interest.

2)Press the Zoom Buttons (T/W) on the remote control. Make sure the remote control is pointed at the camcorder's remote sensor. Pressing T zooms in.

3)You can move the image on screen around to find a particular portion of the picture. While holding down SHIFT, press (Left), (Right), (Up) and (Down).

■To end zoom, press and hold W until magnification returns to normal. Or, press STOP (5) and then press PLAY (4).

NOTES:

●Zoom can also be used during slow-motion and still playback.

●Due to digital image processing, the quality of the image may suffer.

●Playback Zoom cannot be used on images that were recorded with the Power Switch set to “PS”.