JVC GR-DVL9800 46 EN, Playback Advanced Features For Video, Using Menus For Detailed Adjustment

46EN

MENU/BRIGHT Wheel

PLAYBACKAdvancedFeaturesForVideo

Using Menus For Detailed Adjustment

					YOFF
				A
			L
		Y	P
		A
		L
		P
		C
			S
				D
		Lock Button
		Power Switch
Recording Start/Stop Button
Display
V I DEO MENU		Menu Screen
1RE TURN
	S TEREO
SOUND MODE
1 2B I T MODE	SOUND L
SYNCHRO	SOUND R
COPY

AV / S–V I DEOGR-DVL9800 only

The following procedure applies to all except Synchro Comp (☞ pg. 76, 77).

1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch.

2 Press MENU/BRIGHT. The Menu Screen appears.

3 Rotate MENU/BRIGHT to select the desired function icon, and press it. The selected function menu appears.

4 Rotate MENU/BRIGHT to select the desired function, and press it to display the Sub Menu.

5 Rotate MENU/BRIGHT to select the desired parameter and press it. Selection is complete.

6 Rotate MENU/BRIGHT to select “1RETURN” and press it twice to close the Menu Screen.

D I SP LAY MENU

1RE TURN
ON SCREEN
DAT E / T I ME
T I ME CODE	ON
	OF F

*Each setting is linked with “DISPLAY MENU”,

which appears when the Power Switch is set to “ ” (☞ pg. 33). The parameters are the same as in the description on pg. 33.

NOTES:

●It is also possible to change the ON SCREEN settings by pressing DISPLAY on the RM- V716U remote control (provided).

●If “ON SCREEN” is set to “SIMPLE”, it keeps the camcorder’s display (except the date, time and time code) from appearing on the connected TV. It also makes the playback sound mode and tape speed disappear on the camcorder.

VIDEO MENU

DISPLAY MENU

SOUND MODE		☞ pg. 47.
12BIT MODE		☞ pg. 47.
SYNCHRO		☞ pg. 77.
	COPY	ON: Enables dubbing of
		images recorded on a
		tape to a MultiMediaCard
		(☞ pg. 67).
		OFF: Enables snapshots to
		be taken during video
		playback.
AV/S-VIDEO		ON: Enables audio/video
(GR-DVL9800		signal input from the AV
only)		and S-VIDEO connectors
		(☞ pg. 63).
		OFF: Enables audio/video
		signal output to a TV,
		VCR, etc. via the AV and
		S-VIDEO connectors.
		(☞ pg. 58, 62)
ON SCREEN*		Makes the camcorder’s
		indications appear/
		disappear from the
		connected TV screen.
DATE/TIME*		Makes the date/time
		appear/disappear on the
		camcorder.
TIME CODE*		Makes the time code
		appear/disappear on the
		camcorder.