FRAME Snapshot mode with frame* Ö
FULL Snapshot mode with no frame* Ö
NEGA/POSI
Nega/Posi mode*
Ö
*There is the sound effect of a shutter closing.
ÖWhen the Shooting Mode Dial is set to “PS”, snapshot recording will be performed with higher quality (☞ pg. 24).
EN19
NOTES:
●To remove the shutter sound, ☞ “BEEP/TALLY” on pg. 31.
●If Digital Zoom is used while in the
●In
●If Snapshot recording is not possible, “PHOTO” blinks when SNAPSHOT is pressed.
●If Programme AE with special effects (☞ pg. 40) is engaged, certain modes of Programme AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks.
●If SNAPSHOT is pressed when “DIS” is set to “ON” (☞ pg. 32), the Stabiliser will be disabled.
●To dub images recorded on a tape to a MultiMediaCard, ☞ pg. 67.
●The flash is disabled during video recording.
●To reduce the
●During playback as well, all snapshot modes except
Nega/Posi mode are available when “ COPY” is set to “OFF” in the VIDEO MENU (☞ pg. 46).
●When a headphone set is connected to the PHONE connector, the shutter sound is not heard from the speaker, however it is recorded onto the tape.
Snapshot Search
Lets you find snapshots during playback of a tape.
1 Play back the tape (☞ pg. 44).
2 Press INDEX SCREEN. “SNAPSHOT SEARCH” appears blinking on the screen and the tape fast- forwards and pauses at a snapshot. When pressed again, the tape pauses at the next snapshot. Repeat until the desired snapshots are found.