JVC GR-DVL9800 specifications 82 EN, Possible Causes Corrective Action

82EN

TROUBLESHOOTING(cont.)

SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
20. The Picture Wipe and	20. •The last selected editing	20. •Select Picture Wipe or
Dissolve functions do not	scene is ending.	Dissolve before beginning
work.	•At the end of the last	recording. The effects are
	selected scene for editing,	then automatically activated
	the Power Switch was set to	(☞ pg. 38).
	“OFF”.	•Do not turn off the
	•The power is off.	camcorder’s power after
		setting Edit-In and Edit-Out
		points, as they will all be
		erased (☞ pg. 38).
		•The camcorder automati-
		cally shuts off after 5
		minutes have elapsed in the
		Record-Standby mode.
		Make sure you continue
		operations within 5 minutes
		after engaging Record-
		Standby mode (☞ pg. 38).
21. The picture wipe function	21. •The Slow Shutter mode is	21. •Disengage the Slow Shutter
does not work.	activated.	mode or set “WIDE MODE”
	•“WIDE MODE” is not set to	to “OFF” before preparing
	“OFF”.	to use the Picture Wipe
		(☞ pg. 32, 38, 40).
22. Scene transition does not	22. •When using “Picture Wipe/	22.
go as expected.	Dissolve” (☞ pg. 38), there
	is a delay of a fraction of a
	second between the
	previous record stop-point
	and the Dissolve start-point.	————
	This is normal, but this slight
	delay becomes especially
	noticeable when shooting
	fast-moving subject or
	during rapid panning.
23. The Video Echo mode	23. •The Picture Wipe or	23. •Set “WIDE MODE” to
does not work.	Dissolve functions are in use.	“CINEMA” or “OFF” mode
	•“WIDE MODE” is set to	(☞ pg. 32).
	“SQUEEZE” or “PS WIDE”	•Do not try to use the Video
	in the Menu Screen.	Echo mode during a Fade-In
	•A Fade-In or Fade-Out is in	or Fade-Out (☞ pg. 38, 40).
	progress.
24. Even when Slow Shutter is	24. •When shooting in the dark,	24. •If you want the lighting to
not selected, the image	the unit becomes highly	look more natural, set GAIN
looks like it is activated.	sensitive to light and the	UP to “AGC” or “OFF” in
	image takes on an effect	the Menu Screen
	similar to Slow Shutter.	(☞ pg. 31).
25. There is no strobe when	25. •The Picture Wipe or	25. •Do not try to use the Classic
the Classic Film or Strobe	Dissolve function is in use.	Film or Strobe mode during
mode is activated.		a scene transition
		(☞ pg. 38, 40).
26. White Balance cannot be	26. •The Sepia or Monotone	26. •Turn off Sepia or Monotone
activated.	mode is activated.	before setting White
		Balance (☞ pg. 40, 43).