JVC GR-DVL9800 specifications 64 EN, Video unit equipped with DV input connector

Page 64

64EN

DUBBING(cont.)

Power Switch

To DV OUT

Core filter

DV cable (provided with GR-DVL9800, optional for GR-DVL9700)

To DV IN

Digital Dubbing Of Recorded Images/ Sounds Between Tapes

It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. Since a digital signal is sent, there is little if any image or sound deterioration.

[To use this camcorder as a player]

1 Make sure all units are turned off. Connect the camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration.

2 Set the camcorder’s Power Switch to “ ” while pressing down the Lock Button located on the switch, turn on the video unit’s power, and insert the appropriate cassettes in the camcorder and the video unit.

3 Engage the video unit’s Record-Pause mode.

4 Engage the camcorder’s Play mode to find a spot just before the edit-in point. Once it is reached, press 4/6on the camcorder.

5 Press 4/6on the camcorder and engage the video unit’s Record mode.

6 Engage the video unit’s Record-Pause mode and press 4/6on the camcorder.

7 Repeat steps 4 through 6 for additional editing, then stop the video unit and camcorder when finished.

Video unit equipped with

DV input connector

NOTES:

●It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (☞ pg. 7).

●If the remote control is used when both the player and recorder are JVC video units, both units will perform the same operation. To prevent this from happening, press the buttons on both units.

●For Digital Dubbing, this camcorder can be connected only to one device at a time.

●If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed.

●Even though the DV cable is connected correctly, sometimes the image may not appear in step 4. If this occurs, turn off the power and make connections again.

●If “Playback Zoom” (☞ pg. 70), “Playback Special Effects” (☞ pg. 71) or “Snapshot” is attempted during playback, only the original playback image recorded on the tape is output from the DV OUT connector.

●When using a DV cable, be sure it has a core filter attached. The core filter reduces interference.

Image 64

Contents GR-DVL9800 GR-DVL9700 Dear Customer It is recommended that youConnection to the mains supply in the United Kingdom Do not cut off the mains plug from this equipmentEN3 Before recording an important sceneCD-ROM EN5 How To Attach Core FiltersRelease the stoppers on both ends of the Core Filter Power Charging the Battery PackLithium-ion is vulnerable in colder temperatures Getting StartedUsing AC Power To Detach The Battery PackEN7 InformationEN Getting Started ContDate/Time Settings Built-in Clock’s Rechargeable Lithium BatteryMENU/BRIGHT Wheel Power Switch Power lamp Lock Button EN910 EN Loading/Unloading a CassetteErase protection tab Cassette holder coverEN11 Recording Mode SettingMenu Screen Sub Menu Loading a MultiMediaCard To Unload a MultiMediaCardPUSH-OPEN Button Card CoverPicture Quality Mode Setting EN13Operation Mode Power Switch Function Position Manual14 EN Full AutoEN15 DualVideo VGATo Adjust The Brightness Of The Display 16 ENRecording Basic Recording For VideoJournalistic Shooting EN17Interface Shooting Snapshot Mode Selection Motor Drive ModeEN Recording Snapshot RecordingSnapshot Search EN19Basic Shooting Snapshot Basic Recording For Digital Still Camera D.S.CSlide Flash Open in the direction of the arrow To Delete Unwanted Still Images EN21To Remove The Shutter Sound Slide the Power Zoom Lever towards T 22 ENBasic Recording For Video And D.S.C ZoomWhen a blank portion is recorded on a tape EN23Proper recording ShootingAdvanced Features For Video And D.S.C Progressive Mode RecordingTo End Progressive Mode Recording Recording Start/Stop Button Power SwitchEN25 Description of Progressive Scan CCDRegular shooting of moving images Advanced Features For Video And D.S.C. Dual ShootingSnapshot Button Video image Still image Focus ButtonFeature Auto Focus Feature Manual FocusEN27 To obtain correct focusHigh Speed Button Recording Start/Stop Button High Speed RecordingNormal Record Standby Recording mode are played back on this camcorder EN29Progressive SLOW-MOTION Playback To Search In Rewind Or ForwardEN Recording Advanced Features For Video And D.S.C. Using Menus For Detailed AdjustmentDetailed camcorder settings pg This camcorder is equipped with an easy-to-useMenu Screen Explanations Timer Camera Menu Manual Menu DemoSide LED DISEN33 Eyes Always fires Perform the procedure below Snapshot FlashFires automatically if it is dark Appears If Auto Is SelectedMENU/BRIGHT Wheel Power Switch Lock Button Flash Brightness AdjustmentEN35 Self-Timer EN37 Second RecordingRecording Start/Stop Button Display Fade/Wipe Effects FADE/WIPE SelectionPicture Wipe or Dissolve Selection To Deactivate The Selected EffectEN39 Fader And Wipe MenuPower Switch Lock Button Display To Deactivate The Selected ModeProgramme AE With Special Effects EN41 Exposure Control Iris LockWhite Balance Adjustment Manual White Balance OperationEN43 To Return To Automatic White BalanceTo Control The Speaker Volume 44 ENPlayback Basic Playback For VideoEN45 Slow-Motion Playback Allows slow-speedFrame-By-Frame Playback Allows frame Playback Zoom and Playback Special EffectsPlayback Advanced Features For Video Using Menus For Detailed Adjustment46 EN Video Menu Display MenuDisplay Playback SoundEN47 48 EN Playback Basic Playback For D.S.CNormal Playback Auto PlaybackIndex Playback Index ScreenEN49 Advanced Features For D.S.C EN PlaybackProtecting Images To Protect AN ImageEN51 Deleting ImagesTo Delete ALL Images Advanced Features For D.S.C. Superimposing a Print FrameTo Make The Print Frame Disappear Press Print FrameEN53 Initialising a MultiMediaCardYou can initialise a MultiMediaCard anytime Print Frame Deletion Bright Wheel Power SwitchDelete Index Screen Deletion Confirmation MENU/ Bright Wheel Power Switch EN55To Delete ALL Print Frames Deletion Confirmation ScreenTo Reset The Setting 56 ENPlayalck To Print ALL Still Images ONE Print for EachEN57 To Reset The No. Of PrintsTo Print by Selecting Still Images and NO. of Prints 58 EN Connections Basic ConnectionsEN59 For GR-DVL9800 owners onlySet AV/S-VIDEO to OFF in the Menu Screen pg Set on Screen to LCD or Simple60 EN Advanced ConnectionsConnection To a Personal Computer Make sure the camcorder and PC are turned offEN61 Connection To a Video Unit Equipped With a DV ConnectorMake sure all units are turned off 62 EN DubbingTo use this camcorder as a player VCR Recording deckEN63 VCR Playback deckTo S-VIDEO Core filter Cable Adapter not providedVideo unit equipped with DV input connector 64 ENEN65 Repeat steps 5 through 7 for additional editing66 EN Disappear when dubbing is completeDubbing Images Stored In a MultiMediaCard To a Tape Dubbing Images Recorded On a Tape To a MultiMediaCard EN67Installing The Batteries 68 ENTab Remote sensorButtons EN69Functions Feature Frame-By-Frame Playback Feature Slow-Motion PlaybackFeature Playback Zoom Feature Playback Special Effects EN71To allow you to add creative effects to the playback image MenuUsing the Remote Control Unit 72 EN9 ` SET REMOTE/VCR CodeJVC VCR equipped with a remote pause connector EN73Make Connections VCR other than above74 EN ProgrammeEditing Menu Remote sensor RM-V716U providedEN75 Automatic Editing to VCR76 EN For More Accurate EditingDiagnosing VCR/CAMCORDER Timing Recording deckAdjustment of VCR/CAMCORDER Timing EN77MENU/BRIGHT Dial GR-DVL9800Set 12BIT Mode to Sound 2 or MIX Menu Screen pg 78 ENAudio Dubbing To hear the dubbed sound during playbackPossible Causes Corrective Action Troubleshooting EN79Bright Troubleshooting Flash Open Switch80 EN Possible CausesNot work Slow Shutter mode Shooting Mode Dial is Set to DUAL, VGA orWork Selected 82 EN EN83 84 EN An error indication Malfunction of some kind Can resume using CamcorderTemperature AC Power Adapter Battery is extremely high/low86EN U i oEN87 88 EN IndexIndications RECManual EN89PS4 0 xW 90 EN LCD Monitor/Viewfinder Indications During Video PlaybackSnapshot SpeedEN91 IndicationsEN User Maintenance Cleaning The CamcorderPress BATT. Release and remove the battery pack After UseTo prevent damage and prolong service life EN93Following cautions To avoid hazards94 EN Dirty heads can cause the following problems To protect the unit, do notAbout moisture condensation Serious malfunctioning96 EN TermsTime Code Zooming98 EN SpecificationsCamcorder For Connectors AC Power Adapter/Charger AA-V67EG or AA-V67EKEN99 GR-DVL9700