BATT. RELEASE
Button
1
3
2
ATTENTION:
Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.
INFORMATION:
It is impossible to charge the
EN7
USING THE BATTERY PACK 1 Tilt the viewfinder upward 1.
With the arrow on the battery pack pointing |
|
2 downward, push the battery pack slightly against the | |
battery pack mount 2, then slide down the battery | |
pack to attach it 3. |
|
•If the battery pack is attached with its | mark set |
in the wrong direction, a malfunction may occur.
To Detach The Battery Pack. . .
.... tilt the viewfinder upward 1 and slide the battery
pack up slightly while pressing BATT. RELEASE to detach it.
Approximate recording time
Battery pack | LCD monitor on/ | LCD monitor off/ |
| Viewfinder off | Viewfinder on |
|
|
|
1hr. 5 min. | 1 hr. 20 min. | |
|
|
|
2 hrs. 10 min. | 2 hrs. 40 min. | |
(optional) |
|
|
|
|
|
3 hrs. 50 min. | 4 hrs. 30 min. | |
(optional) |
|
|
|
|
|
7 hrs. 30 min. | 9 hrs. | |
(optional) |
|
|
NOTES:
●Recording time is reduced significantly under the following conditions:
•Zoom or
•The LCD monitor is used repeatedly.
●Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.
USING AC POWER
Use the AC Power Adapter/Charger (connect as shown in the illustration).
NOTES:
●The provided AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to 240 V.
●For other notes, ☞ pg. 6.
To AC outlet
Power cord
AC Power
Adapter/Charger
To battery | DC cord |
pack mount |
|
To DC OUT connector