JVC GR-DVL9800 specifications Advanced Features For Video And D.S.C, Progressive Mode Recording

24ENRECORDING

AdvancedFeaturesForVideoAndD.S.C.

SNAPSHOT Button Progressive Mode Recording

Recording

Start/Stop

Button

Power Switch

OFF

Y

A

L

P

Y	D
ALP CS

Lock Button

This mode lets you record moving images (successive jitter-free still images) onto a tape. Images can then played back jitter-free, with superior quality. High-resolution still images can also be processed on a personal computer or can be printed out (☞ pg. 61).

1 Set the Shooting Mode Dial to “PS”, then set the Power Switch to “” or “ ” while pressing down the Lock Button located on the switch. Pull out the viewfinder fully or open the LCD monitor fully.

2 To start Progressive Mode Recording, press the Recording Start/Stop Button.

To End Progressive Mode Recording . . .

.... press the Recording Start/Stop Button. The camcorder

enters the Record-Standby mode.

NOTES:

●When an image recorded using the Progressive Mode is played back, the image may not look natural.

●When the Shooting Mode Dial is set to “PS”, Picture Wipe/Dissolve (☞ pg. 38) and some Programme AE with special effects (☞ pg. 40) cannot be used.

●If SNAPSHOT is pressed in the PS mode, a snapshot will be recorded with higher quality than in VIDEO mode.

However, “MULTI-4” and “MULTI-9” cannot be used (☞ pg. 19).

PS

VIDEO

DUAL

XGA

VGA

Shooting Mode Dial