JVC GR-DVL9800 EN73, Make Connections, JVC VCR equipped with a remote pause connector

	Connector
	cover**
	To	To AV
To JLIP	S-VIDEO
(EDIT)
		Core filter
Core filter
	Audio/Video cable
	[mini-plug to RCA plug]
S-Video cable	(provided)
(provided)
Editing cable
(provided)	To AUDIO, VIDEO*
	and	-IN
	connectors
“Y/C”/“CVBS”	If your VCR has the
video out
select switch	SCART connector,
	use the provided
	cable adapter.
To Remote
PAUSE or
R.A.EDIT	VCR

EN73

MAKE CONNECTIONS

Also refer to pg. 58 and 59.

1 A JVC VCR equipped with a remote pause connector . . .

... connect the editing cable to the Remote PAUSE connector.

A JVC VCR not equipped with a remote pause connector but equipped with an R.A. EDIT connector . . .

... connect the editing cable to the R.A.EDIT connector.

A VCR other than above . . .

... connect the editing cable to the RM-V716U’s PAUSE IN connector.

2 Insert a recorded tape into the camcorder and set the

Power Switch to “ ” while pressing down the Lock Button located on the switch.

3 Turn the VCR power on, insert a recordable tape and engage the AUX mode (refer to the VCR’s instructions).

NOTES:

●Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they do, they will be recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen (☞ pg. 46). •Time Code

.... set “TIME CODE” to “ON” or “OFF” in the Menu

To PAUSE IN

DISPLAY

RM-V716U (provided)

TV

Screen (☞ pg. 46).

•Playback Sound Mode, Tape Speed And Tape Running Displays

.... set “ON SCREEN” to “LCD” or “SIMPLE” in the

Menu Screen (☞ pg. 46). Or, press DISPLAY on the RM-V716U remote control.

● For GR-DVL9800 owners: Make sure to set “AV/

S-VIDEO” to “OFF” in the Menu Screen (☞ pg. 46).

● Use the provided cables, making sure to connect the

ends with a core filter to the camcorder. The core filter

*Connect when an S-Video cable is not used.

**When connecting cables, open this cover.

ATTENTION FOR EDITING CABLE

•Be careful not to mistake it for the JLIP cable (☞ pg. 4).

•Make sure you connect the end with the core filter (plug which has 3 rings around the pin) to the camcorder.

reduces interference.

● Set the video out select switch of the cable adapter as

required:

Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable.

CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.

●When editing on a VCR equipped with a DV input connector, an optional DV cable can be connected instead of an S-Video cable and audio/video cable.

CONTINUED ON NEXT PAGE