JVC GR-DVL9800 specifications Dubbing Images Recorded On a Tape To a MultiMediaCard, EN67

Rotate MENU/BRIGHT to select “1RETURN” and press it twice. The normal playback screen resumes.

EN67

Power Switch

				YOFF
			A
MENU/BRIGHT Wheel		P	L
	L
	Y
	A
	P
	C
		S
				D
SNAPSHOT Button

Lock Button

V I DEO MENU

1RETURN

SOUND MODE

1 2B I T MODE

SYNCHRO

COPY OF F

AV / S – V I DEO ON

GR-DVL9800 only

INDEX SCREEN Button

Play/Pause Button (4/6)

Display

SP 6

Dubbing Images Recorded On A Tape To A MultiMediaCard

Images can be dubbed from a tape to a MultiMediaCard.

1 Load a MultiMediaCard (☞ pg. 12) and cassette (☞ pg. 10).

2 Set the Power Switch to “ ” while pressing down the Lock Button. Open the LCD monitor fully or pull out the viewfinder fully.

3 Press MENU/BRIGHT. The Menu Screen appears. Rotate it to select “ ” and press it. “VIDEO MENU” appears.

4 Rotate MENU/BRIGHT to select “ COPY” and press it. The Sub Menu appears. Rotate it to select “ON” and press it. Selection is complete.

5

6 To select a video image to be dubbed, start playback by pressing 4/6. At the moment you find the image you wish to dub, press it again to engage Still Playback.

OR

If you want to dub a snapshot recorded on the tape to the MultiMediaCard, press INDEX SCREEN to find the snapshot. The tape fast-forwards and pauses at the snapshot. Press it repeatedly until the desired snapshots are found.

7 To start dubbing, press SNAPSHOT. The selected image is stored in the MultiMediaCard.

•“” blinks during dubbing.

NOTES:

●If SNAPSHOT is pressed in step 7 when a MultiMediaCard is not loaded, the message “COPYING FAILED” is displayed.

●If an image recorded on the tape using the WIDE mode (☞ pg. 32) is dubbed to a MultiMediaCard, the WIDE mode identifying signal is not dubbed with it.

●To use Playback Special Effects with a video image you

wish to dub, perform up to step 7 using the RM-V716U remote control (provided) (☞ pg. 71).

●Images are dubbed in VGA file size.