JVC GR-DVL9800 62 EN, Dubbing, To use this camcorder as a player, VCR Recording deck

Engage the VCR’s AUX and Record-Pause modes.

62EN

DUBBING

	Connector
	cover**
	To AV
To S-VIDEO
	Core filter
Core filter	Audio/Video cable
	[mini-plug to RCA plug]
	(provided)
S-Video cable
(provided)
	To AUDIO, VIDEO*
	and -IN
	connectors
“Y/C”/“CVBS”	Cable Adapter
	(provided)
video out
	If your VCR has a
select switch
	SCART connector,
	use the provided
	cable adapter.

VCR (Recording deck)

Dubbing Images/Sounds Recorded On A Tape To Another Tape

[To use this camcorder as a player]

1 Make sure all units are turned off, then connect the camcorder and the VCR as shown in the illustration. Also refer to pg. 58 and 59.

2 Set the camcorder’s Power Switch to “ ” while pressing down the Lock Button located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.

3 [For GR-DVL9800 owners only]

Set “AV/S-VIDEO” to “OFF” in the Menu Screen (☞ pg. 46).

4

5 Engage the camcorder’s Play mode to find a spot just before the edit-in point. Once it is reached, press 4/6on the camcorder.

6 Press 4/6on the camcorder and engage the VCR’s Record mode.

7 Engage the VCR’s Record-Pause mode and press 4/6on the camcorder.

8 Repeat steps 5 through 7 for additional editing, then stop the VCR and camcorder when finished.

TV

*Connect when an S-Video cable is not used.

**When connecting the cables, open this cover.

Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen (☞ pg. 46). •Time Code

.... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (☞ pg. 46).

•Playback Sound Mode, Tape Speed And Tape Running Displays

.... set “ON SCREEN” to “LCD” or “SIMPLE” in the

Menu Screen (☞ pg. 46). Or, press DISPLAY on the RM-V716U remote control.

NOTES:

●Use the provided cables, making sure to connect the ends with a core filter to the camcorder. The core filter reduces interference.

●Set the video out select switch of the cable adapter as required:

Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable.

CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.

●You can use Playback Zoom (☞ pg. 70) or Playback Special Effects (☞ pg. 71) in step 6.

●It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (☞ pg. 7).