JVC GR-DVL9800 specifications EN User Maintenance, After Use, Cleaning The Camcorder

To clean the lens, blow it with a blower brush, then wipe gently with lens cleaning paper.

92ENUSERMAINTENANCE

After Use

1 Turn off the camcorder.

2 Slide OPEN/EJECT in the direction of the arrow, then swing the cassette holder cover open until it locks. The cassette holder opens automati- cally. Remove the cassette.

3 Press “PUSH HERE” to close the cassette holder. •Once the cassette holder is closed, it recedes

automatically. Wait until it recedes completely before closing the cassette holder cover.

4 Press BATT. RELEASE and remove the battery pack.

Cassette holder Remove.

OPEN/EJECT

Switch

Cassette holder cover

PUSH HERE

BATT. RELEASE

Button

1

3 2

Cleaning The Camcorder

1 To clean the exterior, wipe gently with a soft cloth.

Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth.

2 Press PUSH-OPENand open the LCD monitor. Wipe gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor.

3

4 To clean the viewfinder, raise it to the vertical position. Carefully lift the plastic tab on the bottom of the viewfinder, and open the cover

1.

5 Insert a lens blower or soft cloth into the gap at the bottom of the viewfinder and clean the interior of the viewfinder with it 2.

6 Close the cover. Tilt the viewfinder back to the horizontal position and push it back in.

NOTES:

●Avoid using strong cleaning agents such as benzine or alcohol.

●Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.

●Mould may form if the lens is left dirty.

●When using a cleaner or chemically treated cloth refer to the cautions of each product.

Cover

1

2

Lens blower