28 en Installing the DINION capture | DINION capture 5000 IP |
|
|
3.Connect the other end of the coax cable to a monitor.
4.Ensure that power is restored to the imager.
5.Press and hold the center key (item 2) for approximately two seconds. The BNC video output is activated and the Install menu appears on the monitor.
6.Adjust settings and setup camera positioning as required.
7.Press and hold the center key a second time to return the video signal back to the Ethernet connection. Release the button once the BNC connection loses the video signal.
8.Replace the back panel using the four hex socket screws and the supplied 3 mm hex key.
3.7Using a microSD Card
The DINION capture 5000 IP supports most microSD cards (SDHC). For a list of recommended cards (not supplied by Bosch), please visit www.boschsecurity.com.
To insert a microSD card:
1.0 2012.01 | Installation Manual | Bosch Security Systems, Inc. |