88 en Advanced Mode | DINION capture 5000 IP |
|
|
signal. The connected monitor only displays images when an alarm is triggered. If a particular video output is selected and a split image is set for this output on the receiver, select the decoder from Decoder in the receiver that is to be used to display the alarm image. Refer to the destination device documentation concerning image display options and available video outputs.
Decoder
Select a decoder of the receiver to display the alarm image. The decoder selected has an impact on the position of the image in a split screen.
SSL encryption
SSL encryption protects data used for establishing a connection, such as the password. By selecting On, only encrypted ports are available for the Remote port parameter. SSL encryption must be activated and configured on both sides of a connection. The appropriate certificates must also have been uploaded. Configure and activate encryption for media data (video, metadata) on the Encryption page.
Auto-connect
Select On to automatically
Audio
Select On to transmit the audio stream with an alarm connection.
1.0 2012.01 | Installation Manual | Bosch Security Systems, Inc. |