Bosch Appliances 5000 IP Network, Click Set and Reboot, IP address, Subnet mask, Gateway address

Page 52

52 en Basic Mode	DINION capture 5000 IP

7.4Network

Use the settings on this page to integrate the device into a network. Some changes only take effect after a reboot. In this case, the Set button changes to Set and Reboot.

1.Make the desired changes.

2.Click Set and Reboot.

–The device is rebooted and the changed settings are activated. If the IP address, subnet mask, or gateway address is changed, then the device is only available under the new addresses after the reboot.

DHCP

If the network has a DHCP server for dynamic IP address allocation, set this parameter to On to activate the automatic acceptance of DHCP-assigned IP addresses.

Note:

Certain applications (for example, Bosch Video Management System) use the IP address for the unique assignment of the device. If using these applications, the DHCP server must support the fixed assignment between IP address and MAC address, and must be appropriately set up so that, once an IP address is assigned, it is retained each time the system is rebooted.

IP address

Enter the desired IP address for the camera. The IP address must be valid for the network.

Subnet mask

Enter the appropriate subnet mask for the set IP address.

Gateway address

Enter the IP address of the gateway to establish a connection to a remote location in a different subnet. Otherwise, this field can remain empty (0.0.0.0).

1.0 2012.01

Installation Manual

Bosch Security Systems, Inc.

Image 52

Contents Dinion capture 5000 IP Page Table of Contents Advanced Mode Basic ModeOperation via the browser ALC Dimensional Drawings 116 Safety Safety precautionsImportant safety instructions Dinion capture 5000 IP Safety en En Safety Dinion capture 5000 IP Important notices Risk GroupCoax grounding Dinion capture 5000 IP Safety en En Safety Dinion capture 5000 IP FCC & Ices Information FCC & Ices complianceInformations FCC et Ices En Safety Dinion capture 5000 IP Bosch notices Video lossCopyright TrademarksDescription Parts ListQuantity Description Installing the Dinion capture Determining the RangeRanges based on capturing Field of View at Optimal Capture DistanceModel Capture Optimal Determining the AngleRange Distance Mounting the Dinion capture En Installing the Dinion capture Dinion capture 5000 IP Dinion capture 5000 IP Installing the Dinion capture en Preparing the Wiring Ethernet and Power Connections Power Input ConnectionsVideo Connection for Installation Making the Connections Connecting to a Coax Cable Using a microSD Card To insert a microSD cardResetting the Dinion capture 5000 IP Automatic Mode Switching Mode Details To setup Automatic Mode SwitchingTo disable Automatic Mode Switching 1 Alarm input, page 103, for more informationInstall Menu ConfigurationMenu Navigation Keys Pre-Defined Modes FullSun ModeMode Lens Wizard submenu Selection DescriptionDefault submenu Network submenuBrowser connection System requirementsEstablishing the connection Password protection in cameraProtected network Connecting to a hardware decoder Alarm connectionConnection established LivepageSettings Livepage Operation via the browserProcessor load Image selection Display StampingDigital I/O System Log / Event LogRecording video sequences Saving snapshotsRunning recording program Audio communication Recordings Controlling playbackSelecting Recordings Export to FTPSlide control BookmarksBasic Mode menu tree Basic ModeSaving changes Device Access PasswordPassword Camera nameConfirm password Date/TimeDevice date, time and zone Time server IP addressClick Set and Reboot NetworkIP address Subnet maskEncoder RecordingSystem Overview Storage mediumAdvanced Mode Advanced Mode menu treeDinion capture 5000 IP Advanced Mode en General IdentificationCamera ID Camera namePassword Date/Time Date formatDevice date / Device time Device time zoneDisplay Stamping Camera name stampingAlarm mode stamping Alarm messageTime stamping Display millisecondsWeb Interface AppearanceLivepage Functions Logging Mode CameraPre-defined modes Copy mode to Mode IDRestore Mode Defaults 2 ALC ALC levelPeak average SpeedDefault shutter / Fixed shutter Shutter/AGCShutter Actual shutterEnhance GainMaximum gain / Fixed gain Actual gainAuto black Sharpness levelDynamic noise reduction Peak white invertInstallation Manual Profile Configuration Profile nameTarget bit rate Maximum bit rateVideo resolution Expert Settings4CIF/D1 GOP structureDefault Select H.264 Settings Encoder Streams264 BP+ bit-rate-limited MP SD 264 BP+ bit-rate MP SD LimitedAudio Privacy MasksJpeg stream En Advanced Mode Dinion capture 5000 IP Installer Menu Recording Storage Management Formatting Storage Media Deactivating Storage Media Stream profile settings Recording ProfilesRecording includes Standard recordingAlarm recording Retention TimeWeekdays Recording SchedulerHolidays Recording Status Profile namesActivate recording Recording statusAlarm Alarm ConnectionsSelect 10 in the Number of destination IP address list box Video transmissionStream Remote portDecoder SSL encryptionAuto-connect AudioVideo Content Analyses VCA VCA configuration- Profiles Aggregation time sMotion detector Analysis typeSensitivity Debounce time 1 s Minimum object sizeSelecting the area Trigger delay s Tamper detectionGlobal change slider Global changeScene too bright Scene too darkScene too noisy Reference checkAppearing edges VCA configuration Scheduled Deleting HolidaysDinion capture 5000 IP Advanced Mode en VCA configuration Event triggered Delay sTrigger Trigger activeAudio Alarm Audio alarmSignal Ranges NameAlarm E-Mail Sender name Destination addressTest e-mail Alarm Task Editor Interfaces Alarm inputRelay Trigger relay Network Access Automatic IP assignmentDNS server address Details Video transmissionHttp browser port Https browser portInterface mode ETH Enable DynDNSRCP+ port Telnet supportHost name User nameForce registration now StatusAuthentication AdvancedSnmp host address / 2. Snmp host address Snmp trapsMulticast Rtsp portUPnP TCP MetadataEnable Multicast AddressPort StreamingFTP Posting Service MaintenanceEncryption FirmwareConfiguration Maintenance log LicensesSystem Overview SSL certificateDimensional Drawings Dinion capturePage Bosch Security Systems, Inc