62 en Advanced Mode | DINION capture 5000 IP |
|
|
8.3.2LIVEPAGE Functions
In this window, adapt the Livepage functions to meet your requirements. Choose from a variety of different options for displaying information and controls.
1.Mark the check boxes for the functions to be displayed on the Livepage. The selected elements are checked.
2.Check the Livepage to see how the desired items are available.
Show alarm inputs
The alarm inputs are displayed next to the video image as icons along with their assigned names. If an alarm is active, the corresponding icon changes color.
Note: Alarm 1 is reserved for Automatic Mode Switching. Refer to Section 3.9 Automatic Mode Switching, page 30.
Show relay outputs
The relay output is shown next to the video image as an icon along with its assigned name. If a relay is switched, the icon changes color.
Show VCA trajectories
The trajectories (motion lines of objects) from the video content analysis are displayed in the live video image if a corresponding analysis type is activated.
Show VCA metadata
When video content analysis (VCA) is activated, additional information is displayed in the live video stream. For example, in Motion+ mode, the sensor areas for motion detection are marked.
Show event log
The event messages are displayed with the date and time in a field next to the video image.
Show system log
The system messages are displayed with the date and time in a field next to the video image and provide information about the establishment and termination of connections, etc.
1.0 2012.01 | Installation Manual | Bosch Security Systems, Inc. |