68 en Advanced Mode | DINION capture 5000 IP |
|
|
Note:
If Sensitivity up is active, some noise or spots may appear in the picture. This is normal camera behavior. Sensitivity up may cause some motion blur on moving objects.
Gain
AGC - the camera automatically sets the gain to the lowest possible value needed to maintain a good picture.
Fixed - sets Fixed gain value. For best performance, Fixed gain is recommended.
Maximum gain / Fixed gain
Selects the maximum value the gain can have during AGC operation (0 to 30 dB).
Selects the gain setting for Fixed gain operation (0 is no gain). Increase gain if license plate image appears dark and decrease gain if plate appears bright.
Actual gain
Displays the actual AGC value from the camera to help compare gain level with lighting levels and picture performance.
8.4.4Enhance
NOTICE!
The Enhance settings are factory set to work optimally for capturing license plates, only an experienced user should change these settings. Use discretion when changing settings.
Dynamic engine
–Off: turns off all automatic scene detail and enhancements (recommended setting).
–XF Dynamic: extra internal processing is enabled for low- light applications (traffic, etc.).
–2X Dynamic: 2X Dynamic adds dual sensor exposure to the XF Dynamic features. In harsh lighting conditions pixels from each exposure are mixed to give a more detailed image (use 2X Dynamic when SmartBLC is not required).
–Smart BLC: BLC window and weighting factor are automatically defined. Camera dynamically adjusts these
1.0 2012.01 | Installation Manual | Bosch Security Systems, Inc. |