Bosch Appliances 5000 IP Power Input Connections, Ethernet and Power Connections

Page 25

DINION capture 5000 IP

Installing the DINION capture en 25

 

 

3.4.1Power Input Connections

A voltage regulator circuit allows for DC or AC operation between 11-30 VDC and 24 VAC. It also provides protection from voltage surges, transient spikes, and reversed voltage. Connect power from a 24 VAC or 11–30 VDC Class 2 power supply to the ferrule tipped power leads (red, black) from the camera. Use minimum AWG18 stranded wire.

Note:

For a Class 2 AC/DC supply the polarity does not matter.

3.4.2Ethernet and Power Connections

Connect the camera to a 10/100 Base-T network.

Use screened UTP Category 5e cable with RJ45 connectors (the camera network socket is Auto MDIX compliant).

Power can be supplied to the camera via the Ethernet cable compliant with the Power-over-Ethernet Plus (IEEE 802.3at) standard.

Three power options, PoE+, 24 VAC, and 11–30 VDC are available. Using PoE+ makes installation easier and more cost- effective, as cameras do not require a local power source. To increase system reliability, the camera can be simultaneously connected to both PoE+ and 11-30 VDC/24 VAC supplies.

By default, power is supplied to the camera via the 11–30 VDC or 24 VAC power input leads.

3.4.3Video Connection for Installation

To assist in setting up the camera, the DINION capture 5000 IP provides a BNC connect on the back panel. Use this BNC connector to temporarily connect a monitor to the IP camera, refer to Section 3.6 Connecting to a Coax Cable, page 27.

Bosch Security Systems, Inc.

Installation Manual

1.0 2012.01

Image 25
Contents Dinion capture 5000 IP Page Table of Contents Advanced Mode Basic ModeOperation via the browser ALC Dimensional Drawings 116 Safety precautions SafetyImportant safety instructions Dinion capture 5000 IP Safety en En Safety Dinion capture 5000 IP Risk Group Important noticesCoax grounding Dinion capture 5000 IP Safety en En Safety Dinion capture 5000 IP FCC & Ices Information FCC & Ices complianceInformations FCC et Ices En Safety Dinion capture 5000 IP Video loss Bosch noticesCopyright TrademarksDescription Parts ListQuantity Description Determining the Range Installing the Dinion captureRanges based on capturing Field of View at Optimal Capture DistanceModel Capture Optimal Determining the AngleRange Distance Mounting the Dinion capture En Installing the Dinion capture Dinion capture 5000 IP Dinion capture 5000 IP Installing the Dinion capture en Preparing the Wiring Ethernet and Power Connections Power Input ConnectionsVideo Connection for Installation Making the Connections Connecting to a Coax Cable To insert a microSD card Using a microSD CardResetting the Dinion capture 5000 IP Automatic Mode Switching To setup Automatic Mode Switching Mode Details1 Alarm input, page 103, for more information To disable Automatic Mode SwitchingInstall Menu ConfigurationMenu Navigation Keys Pre-Defined Modes FullSun ModeMode Selection Description Lens Wizard submenuNetwork submenu Default submenuSystem requirements Browser connectionEstablishing the connection Password protection in cameraProtected network Alarm connection Connecting to a hardware decoderLivepage Connection establishedSettings Livepage Operation via the browserProcessor load Display Stamping Image selectionSystem Log / Event Log Digital I/ORecording video sequences Saving snapshotsRunning recording program Audio communication Controlling playback RecordingsSelecting Recordings Export to FTPBookmarks Slide controlBasic Mode menu tree Basic ModeSaving changes Password Device AccessPassword Camera nameDate/Time Confirm passwordDevice date, time and zone Time server IP addressNetwork Click Set and RebootIP address Subnet maskRecording EncoderSystem Overview Storage mediumAdvanced Mode menu tree Advanced ModeDinion capture 5000 IP Advanced Mode en Identification GeneralCamera ID Camera namePassword Date format Date/TimeDevice date / Device time Device time zoneCamera name stamping Display StampingAlarm message Alarm mode stampingTime stamping Display millisecondsAppearance Web InterfaceLivepage Functions Logging Mode CameraPre-defined modes Copy mode to Mode IDRestore Mode Defaults ALC level 2 ALCPeak average SpeedShutter/AGC Default shutter / Fixed shutterShutter Actual shutterGain EnhanceMaximum gain / Fixed gain Actual gainSharpness level Auto blackDynamic noise reduction Peak white invertInstallation Manual Profile name Profile ConfigurationTarget bit rate Maximum bit rateExpert Settings Video resolution4CIF/D1 GOP structureDefault Encoder Streams Select H.264 Settings264 BP+ bit-rate-limited MP SD 264 BP+ bit-rate MP SD LimitedAudio Privacy MasksJpeg stream En Advanced Mode Dinion capture 5000 IP Installer Menu Recording Storage Management Formatting Storage Media Deactivating Storage Media Recording Profiles Stream profile settingsRecording includes Standard recordingRetention Time Alarm recordingWeekdays Recording SchedulerHolidays Profile names Recording StatusActivate recording Recording statusAlarm Connections AlarmVideo transmission Select 10 in the Number of destination IP address list boxStream Remote portSSL encryption DecoderAuto-connect AudioVideo Content Analyses VCA Aggregation time s VCA configuration- ProfilesMotion detector Analysis typeSensitivity Debounce time 1 s Minimum object sizeSelecting the area Tamper detection Trigger delay sGlobal change slider Global changeScene too dark Scene too brightScene too noisy Reference checkAppearing edges Deleting Holidays VCA configuration ScheduledDinion capture 5000 IP Advanced Mode en Delay s VCA configuration Event triggeredTrigger Trigger activeAudio alarm Audio AlarmSignal Ranges NameAlarm E-Mail Sender name Destination addressTest e-mail Alarm Task Editor Interfaces Alarm inputRelay Trigger relay Automatic IP assignment Network AccessDetails Video transmission DNS server addressHttp browser port Https browser portEnable DynDNS Interface mode ETHRCP+ port Telnet supportUser name Host nameForce registration now StatusAdvanced AuthenticationSnmp host address / 2. Snmp host address Snmp trapsRtsp port MulticastUPnP TCP MetadataMulticast Address EnablePort StreamingFTP Posting Maintenance ServiceEncryption FirmwareConfiguration Licenses Maintenance logSystem Overview SSL certificateDinion capture Dimensional DrawingsPage Bosch Security Systems, Inc