DINION capture 5000 IP | Browser connection en 39 |
|
|
5.4Connecting to a hardware decoder
A compatible H.264 hardware decoder with a monitor can be connected to the camera using an Ethernet network connection. Cameras are designed to automatically connect with other BVIP devices with the correct configuration. The units only need to be part of the same closed network. In this way it is possible to cover large distances with little installation or cabling effort.
5.4.1Alarm connection
With the appropriate configuration, a connection between camera and decoder is established automatically when an alarm is triggered. After a short time, the live video image from the transmitter is shown on the connected monitor. In this case, no computer is needed to establish the connection.
Note:
Make sure the devices are configured for the network environment and that the correct IP address for the remote location is set on the Alarm connections configuration page.
Bosch Security Systems, Inc. | Installation Manual | 1.0 2012.01 |