Bosch Appliances 5000 IP Scene too bright, Scene too dark, Scene too noisy, Reference check

Page 94

94 en Advanced Mode	DINION capture 5000 IP

Scene too bright

Activate this function if tampering associated with exposure to extreme light (for instance, shining a flashlight directly on the objective) should trigger an alarm. The average brightness of the scene provides a basis for recognition.

Scene too dark

Activate this function if tampering associated with covering the objective (for instance, by spraying paint on it) should trigger an alarm. The average brightness of the scene provides a basis for recognition.

Scene too noisy

Activate this function if tampering associated with EMC interference (noisy scene as the result of a strong interference signal in the vicinity of the video lines) should trigger an alarm.

Reference check

Save a reference image that can be continuously compared with the current video image. If the current video image in the marked areas differs from the reference image, an alarm is triggered. This detects tampering that would otherwise not be detected, for example, if the camera is turned.

1.Click Reference to save the currently visible video- image as a reference.

2.Click Select Area and select the areas in the reference image that are to be monitored.

3.Check the box Reference check to activate the on-going check. The stored reference image is displayed in black and white below the current video image, and the selected areas are marked in yellow.

4.Select the Disappearing edges or Appearing edges option to specify the reference check once again.

Disappearing edges

The area selected in the reference image should contain a prominent structure. If this structure is concealed or moved, the reference check triggers an alarm. If the selected area is too homogenous, so that concealing and moving the structure

1.0 2012.01

Installation Manual

Bosch Security Systems, Inc.

Image 94

Contents Dinion capture 5000 IP Page Table of Contents Advanced Mode Basic ModeOperation via the browser ALC Dimensional Drawings 116 Safety Safety precautionsImportant safety instructions Dinion capture 5000 IP Safety en En Safety Dinion capture 5000 IP Important notices Risk GroupCoax grounding Dinion capture 5000 IP Safety en En Safety Dinion capture 5000 IP FCC & Ices Information FCC & Ices complianceInformations FCC et Ices En Safety Dinion capture 5000 IP Copyright Bosch noticesVideo loss TrademarksDescription Parts ListQuantity Description Ranges based on capturing Installing the Dinion captureDetermining the Range Field of View at Optimal Capture DistanceModel Capture Optimal Determining the AngleRange Distance Mounting the Dinion capture En Installing the Dinion capture Dinion capture 5000 IP Dinion capture 5000 IP Installing the Dinion capture en Preparing the Wiring Ethernet and Power Connections Power Input ConnectionsVideo Connection for Installation Making the Connections Connecting to a Coax Cable Using a microSD Card To insert a microSD cardResetting the Dinion capture 5000 IP Automatic Mode Switching Mode Details To setup Automatic Mode SwitchingTo disable Automatic Mode Switching 1 Alarm input, page 103, for more informationInstall Menu ConfigurationMenu Navigation Keys Pre-Defined Modes FullSun ModeMode Lens Wizard submenu Selection DescriptionDefault submenu Network submenuBrowser connection System requirementsEstablishing the connection Password protection in cameraProtected network Connecting to a hardware decoder Alarm connectionConnection established LivepageSettings Livepage Operation via the browserProcessor load Image selection Display StampingDigital I/O System Log / Event LogRecording video sequences Saving snapshotsRunning recording program Audio communication Selecting Recordings RecordingsControlling playback Export to FTPSlide control BookmarksBasic Mode menu tree Basic ModeSaving changes Password Device AccessPassword Camera nameDevice date, time and zone Confirm passwordDate/Time Time server IP addressIP address Click Set and RebootNetwork Subnet maskSystem Overview EncoderRecording Storage mediumAdvanced Mode Advanced Mode menu treeDinion capture 5000 IP Advanced Mode en Camera ID GeneralIdentification Camera namePassword Device date / Device time Date/TimeDate format Device time zoneDisplay Stamping Camera name stampingTime stamping Alarm mode stampingAlarm message Display millisecondsWeb Interface AppearanceLivepage Functions Logging Mode CameraPre-defined modes Copy mode to Mode IDRestore Mode Defaults Peak average 2 ALCALC level SpeedShutter Default shutter / Fixed shutterShutter/AGC Actual shutterMaximum gain / Fixed gain EnhanceGain Actual gainDynamic noise reduction Auto blackSharpness level Peak white invertInstallation Manual Target bit rate Profile ConfigurationProfile name Maximum bit rate4CIF/D1 Video resolutionExpert Settings GOP structureDefault 264 BP+ bit-rate-limited MP SD Select H.264 SettingsEncoder Streams 264 BP+ bit-rate MP SD LimitedAudio Privacy MasksJpeg stream En Advanced Mode Dinion capture 5000 IP Installer Menu Recording Storage Management Formatting Storage Media Deactivating Storage Media Recording includes Stream profile settingsRecording Profiles Standard recordingAlarm recording Retention TimeWeekdays Recording SchedulerHolidays Activate recording Recording StatusProfile names Recording statusAlarm Alarm ConnectionsStream Select 10 in the Number of destination IP address list boxVideo transmission Remote portAuto-connect DecoderSSL encryption AudioVideo Content Analyses VCA VCA configuration- Profiles Aggregation time sMotion detector Analysis typeSensitivity Debounce time 1 s Minimum object sizeSelecting the area Global change slider Trigger delay sTamper detection Global changeScene too noisy Scene too brightScene too dark Reference checkAppearing edges VCA configuration Scheduled Deleting HolidaysDinion capture 5000 IP Advanced Mode en Trigger VCA configuration Event triggeredDelay s Trigger activeSignal Ranges Audio AlarmAudio alarm NameAlarm E-Mail Sender name Destination addressTest e-mail Alarm Task Editor Interfaces Alarm inputRelay Trigger relay Network Access Automatic IP assignmentHttp browser port DNS server addressDetails Video transmission Https browser portRCP+ port Interface mode ETHEnable DynDNS Telnet supportForce registration now Host nameUser name StatusSnmp host address / 2. Snmp host address AuthenticationAdvanced Snmp trapsUPnP MulticastRtsp port TCP MetadataPort EnableMulticast Address StreamingFTP Posting Encryption ServiceMaintenance FirmwareConfiguration System Overview Maintenance logLicenses SSL certificateDimensional Drawings Dinion capturePage Bosch Security Systems, Inc