DINION capture 5000 IP | Advanced Mode en 83 |
|
|
Alarm recording
Select the
Check the with encoding interval from profile: box and select a predefined profile to set a specific encoding interval for alarm recording.
Check the Export to FTP box to send standard H.264 files to the FTP server whose address is displayed.
Alarm triggers
Select the alarm type (Alarm input/ Motion/Audio alarm / Video loss alarm) that is to trigger a recording. Select the Virtual alarm sensors that are to trigger a recording, via RCP+ commands or alarm scripts, for example.
8.5.3Retention Time
Specify the retention times for recordings. If the available memory capacity of a medium has been used, older recordings are only overwritten once the retention time entered here has expired.
Make sure that the retention time corresponds with the available memory capacity. A rule of thumb for the memory requirement is as follows: 1 GB per hour retention time with 4CIF for complete frame rate and high image quality.
Enter the required retention time in hours or days for each recording. Recording 1 corresponds to Stream 1; Recording 2 corresponds to Stream 2.
Bosch Security Systems, Inc. | Installation Manual | 1.0 2012.01 |