Panasonic AW-E800 manual 11. I/F Remote Connector I/F Remote, Power Indicator, Cable Clamp

Page 11

11. I/F Remote Connector (I/F REMOTE)

Input terminal dedicated to control signals from the optional Remote Control Box (RCB) (WV-CB700A) and the RCU (WV-RC700A, WV-RC550) and the camera pan/tilt unit (AW-PH300).

*WV-CB700A is connected through the optional RCB cable (AW-CA50T10/AW-CA50B10).

*WV-RC700A/WV-RC550 is connected through the optional RCU cable (AW-CA50A26).

*AW-PH300 is connected through the optional pan/ tilt unit cable (AW-CA50T15/AW-CA50A15).

12.Power Indicator

Red LED lamp lights to indicate that the specified DC power is supplied to the camera.

13.DC 12 V Input Connector (DC 12V IN)

12 V DC is supplied through the optional DC power supply cable (AW-CA4T1).

Cautions

1.Connect this to a DC 12 V class 2 power supply only.

2.To prevent fire or shock, the UL listed wire VW-1, style 1007 should be used as for the cable for DC 12 V Input Connector.

14.Cable Clamp

Clamp the DC Power Supply Cable (AW-CA4T1) connected to the DC 12 V Input Connector to pre- vent it from slipping out.

15.G/L Input Connector (G/L IN)

Signals synchronized with the reference signal are to be supplied to this connector when the camera is to be synchronized with the reference signal BB.

16.Optional Card Slot

Slot for inserting an optional card. For details, refer to the manual for optional cards.

-9-

Image 11

Contents Convertible Camera Model No. AW-E800 Lightning flash with arrowhead sym Contents Preface FeaturesSpecial Notes on Operation Donts PrecautionsDOS Major Operating Controls and Their Functions Cooling Fan Menu Switch MENU/MITEM/AWC Switch ITEM/AWC Lens fixing ring knobIris Connector Iris YES/ABC Switch YES/ABC/+NO/BAR Switch NO/BAR/− Video Output Connector Video OUT15. G/L Input Connector G/L 11. I/F Remote Connector I/F RemotePower Indicator DC 12 V Input Connector DC 12VLens Mounting MountingCamera Mounting Flange Back Adjustment for Zoom Lens Iris Gain Control in a Lens Automatic iris power zoom lensConnections Connection of Device with a Composite Input ConnectorWV-RC700A Connection of a Remote Control Unit RCUConnection of a Remote Control BOX RCB Lens Connection of Devices with Camera PAN/TILT Control SystemSignal BB Connection with Multiple Cameras Color Lock ModeConnection of Computer Color temperature and adjustment of white balance AdjustmentCamera Automatic White Balance Control AWCAutomatic Tracking White Balance Setting ATW Manual White Balance SettingBlack Balance Adjustment Reset to 3 200K or 5 600K White BalanceTotal Pedestal Level ADJUST- Ment Horizontal Phase Control GEN-LOCK AdjustmentColor Phase Adjustment Setting by Camera USE Mode SettingCamera RCU RCB Setting by RCU RCB or Hybrid Control PanelMain Menu Screen Menu Item SettingMenu Item Setting Main Menu of User ModeFrom RCU RCB SettingFrom the camera alone SUB Menu Halogen Mode, Fluorescent Mode, Outdoor Mode Auto ND ELC Setting Auto ND ELC ON/OFF Video Level Adjustment Picture Level -50 +50Detecting Ratio Adjustment Light PEAK/AVG P50 A50 Manual Gain Up Control Setting Manu Gain Up DB 30 dB / N/Eye 0Skin Color Adjustment Flesh Tone -3 +3 Black Level Setting Pedestal -30 +30Contrast Adjustment Contrast Gamma LOW/MID/HIGH Chroma Level Adjustment Chroma Level -3 +37Detail Select Setting DTL Select Normal/Super 4Sub Carrier Phase Coarse Adjustment SC Coarse 1/2/3/45Subcarrier Phase Fine Adjustment SC Fine -511 +511 6Color Bar Setup Setting Color Bar Set 0.0 IRE/7.5 IREPage @5Negative/Positive Selection Nega/Posi Posi/Nega @3CCD Read Out Mode Setting V Resolution Normal/FineSub Menu User Mode #1Auto Iris Level Fine Adjustment Auto Iris Adjust ON/OFF @8Video Level Adjustment Picture Level -50 +50@9Detecting Ratio Adjustment Light PEAK/AVG P50 A50 100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 #3Electronic Shutter Step Setting Step OFF/1/100 1/10#6Gain Up Setting Gain AGC HIGH/AGC LOW/ 0 dB 30 dB / N/Eye #5CCD Read Out Mode Setting Field/Frame Field/Frame 1/FramePedestal, B Pedestal #7Black Level Setting Pedestal -30 +30#8Chroma Level Adjustment Chroma Level -3 +3 $0Highlight Chroma Setting Highlight Chroma$5Subcarrier Phase Fine Adjustment SC Fine -511 +511 $22-dimensional Lowpass Filter Setting 2D LPF$3Horizontal Phase Adjustment H Phase -206 +49 $4Subcarrier Phase Coarse Adjustment SC Coarse 1/2/3/45Corner Detail Setting Corner Detail OFF/ON 0Noise Suppress Compensation Level Setting Noise Suppress 12Dark Detail Compensation Level Setting Dark Detail 0 3Chroma Detail Compensation Level Setting Chroma Detail 01Flare Correction Level Setting Flare R/G/B 0 8Gamma Correction Level Setting Gamma 0.359Knee Compensation Level Setting Knee Point 88% 98%/Dynamic 0White Clip Level Setting White Clip 95% 110%Setting to initial set Setting to Initial SETInitial Settings of the Setting Items Factory preset values User Mode Wide AppearanceNtsc SpecificationsBack Panel MENU, ITEM/AWC, YES/ABC, NO/BAR Optional Accessories Standard AccessoriesNM1199-1010 7J1A402B

Related manuals

Manual 56 pages 23.74 Kb