Panasonic AW-E800 manual Special Notes on Operation

Page 5

11.

A digital highlight chroma circuit reproduces natural

14.

SMPTE color bar is indicated on the monitor screen.

 

dynamic ranges.

15.

Remote control with a RCU, RCB or a Hybrid con-

12.

A digital color matrix enables high fidelity color

 

trol panel.

 

images.

16.

Aspect ratio is 16:9 and 4:3 selectable.

13.Four use modes for each of your specific applica- tions can be selected.

SPECIAL NOTES ON OPERATION

Turn power off before connecting or disconnecting cables.

Connection or disconnection of any studio cable, RCB cable or other cable to any unit of equipment must be performed while power is off.

While the camera is in automatic mode;

Shooting of bright objects in ELC operation mode may result in a smeared picture unique to the CCD. The ATW function under fluorescent illumination can adversely change the white balance.

There is a cooling fan inside. It is an expendable part, and must be replaced about every 30 000 hours. (Whenever fan replacement is necessary, be sure to ask the store where you purchased the set.)

-3-

Image 5
Contents Convertible Camera Model No. AW-E800 Lightning flash with arrowhead sym Contents Preface FeaturesSpecial Notes on Operation Donts PrecautionsDOS Major Operating Controls and Their Functions ITEM/AWC Switch ITEM/AWC Menu Switch MENU/MLens fixing ring knob Cooling FanNO/BAR Switch NO/BAR/− YES/ABC Switch YES/ABC/+Video Output Connector Video OUT Iris Connector IrisPower Indicator 11. I/F Remote Connector I/F RemoteDC 12 V Input Connector DC 12V 15. G/L Input Connector G/LLens Mounting MountingCamera Mounting Flange Back Adjustment for Zoom Lens Iris Gain Control in a Lens Automatic iris power zoom lensConnections Connection of Device with a Composite Input ConnectorWV-RC700A Connection of a Remote Control Unit RCUConnection of a Remote Control BOX RCB Lens Connection of Devices with Camera PAN/TILT Control SystemSignal BB Connection with Multiple Cameras Color Lock ModeConnection of Computer Color temperature and adjustment of white balance AdjustmentCamera Automatic White Balance Control AWCAutomatic Tracking White Balance Setting ATW Manual White Balance SettingBlack Balance Adjustment Reset to 3 200K or 5 600K White BalanceTotal Pedestal Level ADJUST- Ment Horizontal Phase Control GEN-LOCK AdjustmentColor Phase Adjustment Setting by Camera USE Mode SettingCamera RCU RCB Setting by RCU RCB or Hybrid Control PanelMenu Item Setting Menu Item SettingMain Menu of User Mode Main Menu ScreenFrom RCU RCB SettingFrom the camera alone SUB Menu Halogen Mode, Fluorescent Mode, Outdoor Mode Auto ND ELC Setting Auto ND ELC ON/OFF Video Level Adjustment Picture Level -50 +50Detecting Ratio Adjustment Light PEAK/AVG P50 A50 Manual Gain Up Control Setting Manu Gain Up DB 30 dB / N/Eye Contrast Adjustment Contrast Gamma LOW/MID/HIGH Black Level Setting Pedestal -30 +30Chroma Level Adjustment Chroma Level -3 +3 0Skin Color Adjustment Flesh Tone -3 +35Subcarrier Phase Fine Adjustment SC Fine -511 +511 4Sub Carrier Phase Coarse Adjustment SC Coarse 1/2/3/46Color Bar Setup Setting Color Bar Set 0.0 IRE/7.5 IRE 7Detail Select Setting DTL Select Normal/SuperPage @5Negative/Positive Selection Nega/Posi Posi/Nega @3CCD Read Out Mode Setting V Resolution Normal/FineSub Menu User Mode #1Auto Iris Level Fine Adjustment Auto Iris Adjust ON/OFF @8Video Level Adjustment Picture Level -50 +50@9Detecting Ratio Adjustment Light PEAK/AVG P50 A50 100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 #3Electronic Shutter Step Setting Step OFF/1/100 1/10#6Gain Up Setting Gain AGC HIGH/AGC LOW/ 0 dB 30 dB / N/Eye #5CCD Read Out Mode Setting Field/Frame Field/Frame 1/Frame#8Chroma Level Adjustment Chroma Level -3 +3 #7Black Level Setting Pedestal -30 +30$0Highlight Chroma Setting Highlight Chroma Pedestal, B Pedestal$3Horizontal Phase Adjustment H Phase -206 +49 $22-dimensional Lowpass Filter Setting 2D LPF$4Subcarrier Phase Coarse Adjustment SC Coarse 1/2/3/4 $5Subcarrier Phase Fine Adjustment SC Fine -511 +5112Dark Detail Compensation Level Setting Dark Detail 0 0Noise Suppress Compensation Level Setting Noise Suppress 13Chroma Detail Compensation Level Setting Chroma Detail 0 5Corner Detail Setting Corner Detail OFF/ON9Knee Compensation Level Setting Knee Point 88% 98%/Dynamic 8Gamma Correction Level Setting Gamma 0.350White Clip Level Setting White Clip 95% 110% 1Flare Correction Level Setting Flare R/G/B 0Setting to initial set Setting to Initial SETInitial Settings of the Setting Items Factory preset values User Mode Wide AppearanceNtsc SpecificationsBack Panel MENU, ITEM/AWC, YES/ABC, NO/BAR Optional Accessories Standard AccessoriesNM1199-1010 7J1A402B
Related manuals
Manual 56 pages 23.74 Kb