Panasonic AW-E800 manual Setting, From the camera alone, From RCU RCB

■SETTING

1.From the camera alone:

Keep the MENU switch depressed for 5 sec- onds or more.

From RCU (RCB):

Set the user set switch in the pocket to the ON position.

The main menu appears on the monitor screen.

2.Each time the MENU switch (M), ITEM/AWC switch (<), or NO/BAR switch (− ) is pressed, the blinking

item moves up or down.

3.When the YES/ABC switch is pressed after select- ing the desired item to blink, the submenu for the selected item appears on the screen.

4.Select the desired item to be changed in its settings using the the MENU switch (M) and ITEM/AWC switch (<).

5.Press the YES/ABC switch (+) or NO/BAR switch (–) to change the settings.

6.Select [Return] using the MENU switch and ITEM/ AWC switch, then press the YES/ABC switch to return to the main menu.

7.After changing the settings, take the following steps.

Camera alone: Select [End] using the MENU switch and ITEM/AWC switch and press the YES/ABC switch.

RCU (RCB): Set the user set switch in the pocket to the OFF position.

The camera will now operate according to the new settings.

	CAMERA
	OPTION CARD	VIDEO OUT
MENU	MENU	I/F REMOTE
		G/L IN
ITEM/AWC	ITEM/AWC
YES/ABC	YES/ABC
		IRIS
NO/BAR	NO/BAR
		DC12V IN

RCU (RCB)

USER SET SWITCH

ENC	OFF
	PAGE	ITEM	UP	DOWN
VF	ON		SC PHASE
USER SET		COARSE		FINE
H.PHASE		0°	270°
		90°	180°

-30-