Panasonic AW-E800 manual Dos

DO'S

•Refer any servicing to qualified service personnel.

•Handle the camera with care.

•Protect the precision made lens by placing the lens cap over when the camera is not in use. If the lens is not installed, protect the surface of the prism by placing the body cap into the lens mount hole.

•Use a mild blower or lens cleaning tissue designed for coated lenses, to clean the surface of the lens or prism in the event that it should become dirty.

•Use a dry cloth to clean the camera if it is dirty. In case the dirt is hard to remove, use mild detergent and wipe gently.

•Use caution when operating the camera in the vicinity of spot lights or bright lights, as well as light reflecting objects and surfaces.

•Take immediate action if ever the camera or RCU should become wet. Turn the power off and have the unit checked by an authorized service facility.

•Follow normal safety precautions to avoid personal injury.

•Use the camera in an environment where the tem- perature is within − 10°C - +45°C (14°F - 113°F),

and the relative humidity is within 30 % - 90 %.

•Always turn the power off when the camera is not going to be used. Operate the camera and RCU only when there is adequate ventilation.

-5-