Panasonic AW-E800 manual Reset to 3 200K or 5 600K White Balance, Black Balance Adjustment

Page 25

Minimize the carrier wave using the red & blue gain controls

Waveform for white balance set chart

RESET TO 3 200K OR 5 600K WHITE BALANCE

When the white balance setting is set to either “P SET 3 200K” or “P SET 5 600K” the white balance will be automatically set to the color temperature 3 200K or 5 600K, respectively.

BLACK BALANCE ADJUSTMENT

• Close the lens.

If the motor drive lens is controlled from the cam-

era, the lens is automatically closed when the black

balance is adjusted.

• When the camera is used without a RCU or RCB,

R/B pedestal adjustment of painting setting will be

In user mode, black balance fine adjustment can be performed with the red pedestal/blue pedestal setting after setting the black balance.

[ADJUSTMENT with the RCU (RCB, Hybrid control panel)]

Set the AUTO set switch to ABC and the black balance will be automatically set. While the system is being set, the auto warning indicator (LED) blinks and it goes out when the black balance setting is completed. If the lamp remains lit, ABC should be tried again.

 

OPTION CARD

VIDEO OUT

 

MENU

I/F REMOTE

 

 

 

ITEM/AWC

G/L IN

 

 

YES/ABC Switch

YES/ABC

 

NO/BAR

IRIS

 

 

 

 

DC12V IN

AUTO LED

PAINTING

AUTO/ATW R GAIN B

ATW

A

TOTAL

B

PED

automatically reset to ±0 after setting the black bal-

ance. (painting setting in only USER MODE.)

[ADJUSTMENT by CAMERA]

Press the YES/ABC Switch for over 2 seconds and the black balance will be set automatically in 10 seconds.

AUTO

R PED B

AWC

AUTOHOLD

ABC

set switch

ABC

-23-

Image 25
Contents Convertible Camera Model No. AW-E800 Lightning flash with arrowhead sym Contents Preface FeaturesSpecial Notes on Operation Donts PrecautionsDOS Major Operating Controls and Their Functions ITEM/AWC Switch ITEM/AWC Menu Switch MENU/MLens fixing ring knob Cooling FanNO/BAR Switch NO/BAR/− YES/ABC Switch YES/ABC/+Video Output Connector Video OUT Iris Connector IrisPower Indicator 11. I/F Remote Connector I/F RemoteDC 12 V Input Connector DC 12V 15. G/L Input Connector G/LLens Mounting MountingCamera Mounting Flange Back Adjustment for Zoom Lens Iris Gain Control in a Lens Automatic iris power zoom lensConnections Connection of Device with a Composite Input ConnectorWV-RC700A Connection of a Remote Control Unit RCUConnection of a Remote Control BOX RCB Lens Connection of Devices with Camera PAN/TILT Control SystemSignal BB Connection with Multiple Cameras Color Lock ModeConnection of Computer Color temperature and adjustment of white balance AdjustmentCamera Automatic White Balance Control AWCAutomatic Tracking White Balance Setting ATW Manual White Balance SettingBlack Balance Adjustment Reset to 3 200K or 5 600K White BalanceTotal Pedestal Level ADJUST- Ment Horizontal Phase Control GEN-LOCK AdjustmentColor Phase Adjustment Setting by Camera USE Mode SettingCamera RCU RCB Setting by RCU RCB or Hybrid Control PanelMenu Item Setting Menu Item SettingMain Menu of User Mode Main Menu ScreenFrom the camera alone SettingFrom RCU RCB SUB Menu Halogen Mode, Fluorescent Mode, Outdoor Mode Detecting Ratio Adjustment Light PEAK/AVG P50 A50 Video Level Adjustment Picture Level -50 +50Auto ND ELC Setting Auto ND ELC ON/OFF Manual Gain Up Control Setting Manu Gain Up DB 30 dB / N/Eye Contrast Adjustment Contrast Gamma LOW/MID/HIGH Black Level Setting Pedestal -30 +30Chroma Level Adjustment Chroma Level -3 +3 0Skin Color Adjustment Flesh Tone -3 +35Subcarrier Phase Fine Adjustment SC Fine -511 +511 4Sub Carrier Phase Coarse Adjustment SC Coarse 1/2/3/46Color Bar Setup Setting Color Bar Set 0.0 IRE/7.5 IRE 7Detail Select Setting DTL Select Normal/SuperPage @5Negative/Positive Selection Nega/Posi Posi/Nega @3CCD Read Out Mode Setting V Resolution Normal/FineSub Menu User Mode @9Detecting Ratio Adjustment Light PEAK/AVG P50 A50 @8Video Level Adjustment Picture Level -50 +50#1Auto Iris Level Fine Adjustment Auto Iris Adjust ON/OFF 100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 #3Electronic Shutter Step Setting Step OFF/1/100 1/10#6Gain Up Setting Gain AGC HIGH/AGC LOW/ 0 dB 30 dB / N/Eye #5CCD Read Out Mode Setting Field/Frame Field/Frame 1/Frame#8Chroma Level Adjustment Chroma Level -3 +3 #7Black Level Setting Pedestal -30 +30$0Highlight Chroma Setting Highlight Chroma Pedestal, B Pedestal$3Horizontal Phase Adjustment H Phase -206 +49 $22-dimensional Lowpass Filter Setting 2D LPF$4Subcarrier Phase Coarse Adjustment SC Coarse 1/2/3/4 $5Subcarrier Phase Fine Adjustment SC Fine -511 +5112Dark Detail Compensation Level Setting Dark Detail 0 0Noise Suppress Compensation Level Setting Noise Suppress 13Chroma Detail Compensation Level Setting Chroma Detail 0 5Corner Detail Setting Corner Detail OFF/ON9Knee Compensation Level Setting Knee Point 88% 98%/Dynamic 8Gamma Correction Level Setting Gamma 0.350White Clip Level Setting White Clip 95% 110% 1Flare Correction Level Setting Flare R/G/B 0Setting to initial set Setting to Initial SETInitial Settings of the Setting Items Factory preset values User Mode Wide AppearanceNtsc SpecificationsBack Panel MENU, ITEM/AWC, YES/ABC, NO/BAR Optional Accessories Standard AccessoriesNM1199-1010 7J1A402B
Related manuals
Manual 56 pages 23.74 Kb