Panasonic AW-E800 manual #3Electronic Shutter Step Setting Step OFF/1/100 1/10

Page 42

#2Electronic Shutter Mode Setting [Shutter Mode:

Step/ELC/S/Scan]

Step: Electronic shutter operates at the speed selected by the Electronic Shutter Step Setting #3.

ELC: Electronic shutter is controlled to automatical- ly adjust the luminance.

S/Scan (Synchro Scan): Electronic shutter oper- ates at the speed selected in Electronic Shutter Synchro-Scan Setting #4.

Note

If Frame 1 is selected in CCD Read Out Mode Setting #5, Electronic Shutter Mode Setting cannot be added.

#3Electronic Shutter Step Setting

[Step: OFF/1/100 - 1/10 000]

This setting is possible only when Step is selected in Electronic Shutter Mode Setting #2.

OFF: Electronic shutter is turned off.

1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000,

1/10 000: Electronic shutter operates at one of these speeds as selected.

Notes

In case of using the RCU (RCB), none of the shut- ter speeds–1/250, 1/2 000, 1/4 000, and 1/10 000 can be selected.

In case of using the hybrid control panel, only OFF, 1/100, or ELC can be selected.

If the lens iris switch is at M (Manual) when oper- ating the camera alone or when the iris switch on the RCU (RCB) is at AUTO, ELC may not function. Set the lens iris switch to A (Auto).

Flickering may increase at ELC under fluorescent lights.

#4Electronic Shutter Synchro Scan Setting [Synchro Scan: 60.58Hz - 15.75kHz]

This setting is possible only when Electronic Shutter Mode Setting #2is at S/Scan.

Bar noise can be reduced by synchro-scan adjust- ment in shooting workstation scenes, for example.

*For luminance setting at each shutter speed and synchro-scan shutter speed, refer to the table on the

next page.

-40-

Image 42
Contents Convertible Camera Model No. AW-E800 Lightning flash with arrowhead sym Contents Features PrefaceSpecial Notes on Operation Precautions DontsDOS Major Operating Controls and Their Functions Lens fixing ring knob Menu Switch MENU/MITEM/AWC Switch ITEM/AWC Cooling FanVideo Output Connector Video OUT YES/ABC Switch YES/ABC/+NO/BAR Switch NO/BAR/− Iris Connector IrisDC 12 V Input Connector DC 12V 11. I/F Remote Connector I/F RemotePower Indicator 15. G/L Input Connector G/LMounting Lens MountingCamera Mounting Flange Back Adjustment for Zoom Lens Automatic iris power zoom lens Iris Gain Control in a LensConnection of Device with a Composite Input Connector ConnectionsConnection of a Remote Control Unit RCU WV-RC700AConnection of a Remote Control BOX RCB Connection of Devices with Camera PAN/TILT Control System LensConnection with Multiple Cameras Color Lock Mode Signal BBConnection of Computer Adjustment Color temperature and adjustment of white balanceAutomatic White Balance Control AWC CameraManual White Balance Setting Automatic Tracking White Balance Setting ATWReset to 3 200K or 5 600K White Balance Black Balance AdjustmentTotal Pedestal Level ADJUST- Ment GEN-LOCK Adjustment Horizontal Phase ControlColor Phase Adjustment USE Mode Setting Setting by CameraSetting by RCU RCB or Hybrid Control Panel Camera RCU RCBMain Menu of User Mode Menu Item SettingMenu Item Setting Main Menu ScreenSetting From the camera aloneFrom RCU RCB SUB Menu Halogen Mode, Fluorescent Mode, Outdoor Mode Video Level Adjustment Picture Level -50 +50 Detecting Ratio Adjustment Light PEAK/AVG P50 A50Auto ND ELC Setting Auto ND ELC ON/OFF Manual Gain Up Control Setting Manu Gain Up DB 30 dB / N/Eye Chroma Level Adjustment Chroma Level -3 +3 Black Level Setting Pedestal -30 +30Contrast Adjustment Contrast Gamma LOW/MID/HIGH 0Skin Color Adjustment Flesh Tone -3 +36Color Bar Setup Setting Color Bar Set 0.0 IRE/7.5 IRE 4Sub Carrier Phase Coarse Adjustment SC Coarse 1/2/3/45Subcarrier Phase Fine Adjustment SC Fine -511 +511 7Detail Select Setting DTL Select Normal/SuperPage @3CCD Read Out Mode Setting V Resolution Normal/Fine @5Negative/Positive Selection Nega/Posi Posi/NegaSub Menu User Mode @8Video Level Adjustment Picture Level -50 +50 @9Detecting Ratio Adjustment Light PEAK/AVG P50 A50#1Auto Iris Level Fine Adjustment Auto Iris Adjust ON/OFF #3Electronic Shutter Step Setting Step OFF/1/100 1/10 100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4#5CCD Read Out Mode Setting Field/Frame Field/Frame 1/Frame #6Gain Up Setting Gain AGC HIGH/AGC LOW/ 0 dB 30 dB / N/Eye$0Highlight Chroma Setting Highlight Chroma #7Black Level Setting Pedestal -30 +30#8Chroma Level Adjustment Chroma Level -3 +3 Pedestal, B Pedestal$4Subcarrier Phase Coarse Adjustment SC Coarse 1/2/3/4 $22-dimensional Lowpass Filter Setting 2D LPF$3Horizontal Phase Adjustment H Phase -206 +49 $5Subcarrier Phase Fine Adjustment SC Fine -511 +5113Chroma Detail Compensation Level Setting Chroma Detail 0 0Noise Suppress Compensation Level Setting Noise Suppress 12Dark Detail Compensation Level Setting Dark Detail 0 5Corner Detail Setting Corner Detail OFF/ON0White Clip Level Setting White Clip 95% 110% 8Gamma Correction Level Setting Gamma 0.359Knee Compensation Level Setting Knee Point 88% 98%/Dynamic 1Flare Correction Level Setting Flare R/G/B 0Setting to Initial SET Setting to initial setInitial Settings of the Setting Items Factory preset values User Mode Appearance WideSpecifications NtscBack Panel MENU, ITEM/AWC, YES/ABC, NO/BAR Standard Accessories Optional AccessoriesNM1199-1010 7J1A402B
Related manuals
Manual 56 pages 23.74 Kb