Panasonic AW-E800 manual Flange Back Adjustment for Zoom Lens

Page 14

FLANGE BACK ADJUSTMENT (FOR ZOOM LENS)

1.Fully open the iris by shooting a dark object. (Iris selection switch should be set to M.)

2.Loosen the flange back lock knob.

3.Aim the camera at any object over 2 meters away from the camera.

4.Set the lens to its TELE end first and adjust its focus with the focus ring.

5.Set the lens to its widest angle next and adjust its focus with the flange back adjust ring.

6.Adjust the focus ring and the flange back adjust ring alternately for the best focus within the zoom- ing range.

Tighten the flange back lock knob upon completion of focusing.

7.Turn the iris selection switch to Position A.

FOCUS Ring

 

Flange back adjust ring

 

I I m

 

 

 

 

 

77

 

 

15 30

5 10

40

 

 

10 3

20

 

 

7 2

10

WIDE

Convertible Camera AW-E800

1 5

0 1.5

5.5

Flange back lock knob

-12-

Image 14
Contents Convertible Camera Model No. AW-E800 Lightning flash with arrowhead sym Contents Features PrefaceSpecial Notes on Operation Precautions DontsDOS Major Operating Controls and Their Functions Lens fixing ring knob Menu Switch MENU/MITEM/AWC Switch ITEM/AWC Cooling FanVideo Output Connector Video OUT YES/ABC Switch YES/ABC/+NO/BAR Switch NO/BAR/− Iris Connector IrisDC 12 V Input Connector DC 12V 11. I/F Remote Connector I/F RemotePower Indicator 15. G/L Input Connector G/LMounting Lens MountingCamera Mounting Flange Back Adjustment for Zoom Lens Automatic iris power zoom lens Iris Gain Control in a LensConnection of Device with a Composite Input Connector ConnectionsConnection of a Remote Control Unit RCU WV-RC700AConnection of a Remote Control BOX RCB Connection of Devices with Camera PAN/TILT Control System LensConnection with Multiple Cameras Color Lock Mode Signal BBConnection of Computer Adjustment Color temperature and adjustment of white balanceAutomatic White Balance Control AWC CameraManual White Balance Setting Automatic Tracking White Balance Setting ATWReset to 3 200K or 5 600K White Balance Black Balance AdjustmentTotal Pedestal Level ADJUST- Ment GEN-LOCK Adjustment Horizontal Phase ControlColor Phase Adjustment USE Mode Setting Setting by CameraSetting by RCU RCB or Hybrid Control Panel Camera RCU RCBMain Menu of User Mode Menu Item SettingMenu Item Setting Main Menu ScreenFrom RCU RCB SettingFrom the camera alone SUB Menu Halogen Mode, Fluorescent Mode, Outdoor Mode Auto ND ELC Setting Auto ND ELC ON/OFF Video Level Adjustment Picture Level -50 +50Detecting Ratio Adjustment Light PEAK/AVG P50 A50 Manual Gain Up Control Setting Manu Gain Up DB 30 dB / N/Eye Chroma Level Adjustment Chroma Level -3 +3 Black Level Setting Pedestal -30 +30Contrast Adjustment Contrast Gamma LOW/MID/HIGH 0Skin Color Adjustment Flesh Tone -3 +36Color Bar Setup Setting Color Bar Set 0.0 IRE/7.5 IRE 4Sub Carrier Phase Coarse Adjustment SC Coarse 1/2/3/45Subcarrier Phase Fine Adjustment SC Fine -511 +511 7Detail Select Setting DTL Select Normal/SuperPage @3CCD Read Out Mode Setting V Resolution Normal/Fine @5Negative/Positive Selection Nega/Posi Posi/NegaSub Menu User Mode #1Auto Iris Level Fine Adjustment Auto Iris Adjust ON/OFF @8Video Level Adjustment Picture Level -50 +50@9Detecting Ratio Adjustment Light PEAK/AVG P50 A50 #3Electronic Shutter Step Setting Step OFF/1/100 1/10 100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4#5CCD Read Out Mode Setting Field/Frame Field/Frame 1/Frame #6Gain Up Setting Gain AGC HIGH/AGC LOW/ 0 dB 30 dB / N/Eye$0Highlight Chroma Setting Highlight Chroma #7Black Level Setting Pedestal -30 +30#8Chroma Level Adjustment Chroma Level -3 +3 Pedestal, B Pedestal$4Subcarrier Phase Coarse Adjustment SC Coarse 1/2/3/4 $22-dimensional Lowpass Filter Setting 2D LPF$3Horizontal Phase Adjustment H Phase -206 +49 $5Subcarrier Phase Fine Adjustment SC Fine -511 +5113Chroma Detail Compensation Level Setting Chroma Detail 0 0Noise Suppress Compensation Level Setting Noise Suppress 12Dark Detail Compensation Level Setting Dark Detail 0 5Corner Detail Setting Corner Detail OFF/ON0White Clip Level Setting White Clip 95% 110% 8Gamma Correction Level Setting Gamma 0.359Knee Compensation Level Setting Knee Point 88% 98%/Dynamic 1Flare Correction Level Setting Flare R/G/B 0Setting to Initial SET Setting to initial setInitial Settings of the Setting Items Factory preset values User Mode Appearance WideSpecifications NtscBack Panel MENU, ITEM/AWC, YES/ABC, NO/BAR Standard Accessories Optional AccessoriesNM1199-1010 7J1A402B
Related manuals
Manual 56 pages 23.74 Kb