Panasonic AW-E800 manual Lens fixing ring knob, Cooling Fan, Lens Mount, Mounting hole

Page 9

o

3. Lens fixing ring knob

Rotate the lens fixing ring knob counterclockwise

and remove the lens mount cap. Mount the lens on

the camera and rotate the lens fixing ring knob

clockwise in order to fix the lens securely.

OPTION CARD

MENU

t

VIDEO OUT I/F REMOTE

4. Cooling Fan

• Do not cover the port or otherwise block ventilation

 

ITEM/AWC

G/L IN

 

y

 

 

 

 

 

u

YES/ABC

 

 

 

IRIS

 

i

NO/BAR

 

!0

 

 

 

 

!1

 

 

 

 

 

DC12V IN

!2

!3

!6 !4 !5

1.Lens Mount

2/3" Standard bayonet type lens or a microscope adaptor can be mounted.

2.Mounting hole

A screw hole (1/4” - 20 UNC) for mounting the cam- era on a wall, ceiling with a mounting bracket or tri- pod.

during operation. Internal heat buildup can cause a

fire.

• The cooling fan has a service life of about 30 000

hours. (at a room temperature of 25°C) Replace the

fan that has come to the end of its service life. (If

the fan is used at a room temperature of 35°C,

replace it about 30% sooner.)

Whenever fan replacement is necessary, be sure to

ask the store where you purchased the set.

5.MENU Switch (MENU/M)

A menu will appear on the monitor screen when this switch is pressed for about 5 seconds. This item can be selected by pressing the switch while the menu is on the screen.

6.ITEM/AWC Switch (ITEM/AWC/<)

The item just below can be selected by pressing this switch while the menu is on the screen. When the menu is not displayed or the camera is in shoot- ing mode, the automatic white balance control can be set with this switch.

-7-

Image 9
Contents Convertible Camera Model No. AW-E800 Lightning flash with arrowhead sym Contents Preface FeaturesSpecial Notes on Operation Donts PrecautionsDOS Major Operating Controls and Their Functions ITEM/AWC Switch ITEM/AWC Menu Switch MENU/MLens fixing ring knob Cooling FanNO/BAR Switch NO/BAR/− YES/ABC Switch YES/ABC/+Video Output Connector Video OUT Iris Connector IrisPower Indicator 11. I/F Remote Connector I/F RemoteDC 12 V Input Connector DC 12V 15. G/L Input Connector G/LLens Mounting MountingCamera Mounting Flange Back Adjustment for Zoom Lens Iris Gain Control in a Lens Automatic iris power zoom lensConnections Connection of Device with a Composite Input ConnectorWV-RC700A Connection of a Remote Control Unit RCUConnection of a Remote Control BOX RCB Lens Connection of Devices with Camera PAN/TILT Control SystemSignal BB Connection with Multiple Cameras Color Lock ModeConnection of Computer Color temperature and adjustment of white balance AdjustmentCamera Automatic White Balance Control AWCAutomatic Tracking White Balance Setting ATW Manual White Balance SettingBlack Balance Adjustment Reset to 3 200K or 5 600K White BalanceTotal Pedestal Level ADJUST- Ment Horizontal Phase Control GEN-LOCK AdjustmentColor Phase Adjustment Setting by Camera USE Mode SettingCamera RCU RCB Setting by RCU RCB or Hybrid Control PanelMenu Item Setting Menu Item SettingMain Menu of User Mode Main Menu ScreenSetting From the camera aloneFrom RCU RCB SUB Menu Halogen Mode, Fluorescent Mode, Outdoor Mode Video Level Adjustment Picture Level -50 +50 Detecting Ratio Adjustment Light PEAK/AVG P50 A50Auto ND ELC Setting Auto ND ELC ON/OFF Manual Gain Up Control Setting Manu Gain Up DB 30 dB / N/Eye Contrast Adjustment Contrast Gamma LOW/MID/HIGH Black Level Setting Pedestal -30 +30Chroma Level Adjustment Chroma Level -3 +3 0Skin Color Adjustment Flesh Tone -3 +35Subcarrier Phase Fine Adjustment SC Fine -511 +511 4Sub Carrier Phase Coarse Adjustment SC Coarse 1/2/3/46Color Bar Setup Setting Color Bar Set 0.0 IRE/7.5 IRE 7Detail Select Setting DTL Select Normal/SuperPage @5Negative/Positive Selection Nega/Posi Posi/Nega @3CCD Read Out Mode Setting V Resolution Normal/FineSub Menu User Mode @8Video Level Adjustment Picture Level -50 +50 @9Detecting Ratio Adjustment Light PEAK/AVG P50 A50#1Auto Iris Level Fine Adjustment Auto Iris Adjust ON/OFF 100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 #3Electronic Shutter Step Setting Step OFF/1/100 1/10#6Gain Up Setting Gain AGC HIGH/AGC LOW/ 0 dB 30 dB / N/Eye #5CCD Read Out Mode Setting Field/Frame Field/Frame 1/Frame#8Chroma Level Adjustment Chroma Level -3 +3 #7Black Level Setting Pedestal -30 +30$0Highlight Chroma Setting Highlight Chroma Pedestal, B Pedestal$3Horizontal Phase Adjustment H Phase -206 +49 $22-dimensional Lowpass Filter Setting 2D LPF$4Subcarrier Phase Coarse Adjustment SC Coarse 1/2/3/4 $5Subcarrier Phase Fine Adjustment SC Fine -511 +5112Dark Detail Compensation Level Setting Dark Detail 0 0Noise Suppress Compensation Level Setting Noise Suppress 13Chroma Detail Compensation Level Setting Chroma Detail 0 5Corner Detail Setting Corner Detail OFF/ON9Knee Compensation Level Setting Knee Point 88% 98%/Dynamic 8Gamma Correction Level Setting Gamma 0.350White Clip Level Setting White Clip 95% 110% 1Flare Correction Level Setting Flare R/G/B 0Setting to initial set Setting to Initial SETInitial Settings of the Setting Items Factory preset values User Mode Wide AppearanceNtsc SpecificationsBack Panel MENU, ITEM/AWC, YES/ABC, NO/BAR Optional Accessories Standard AccessoriesNM1199-1010 7J1A402B
Related manuals
Manual 56 pages 23.74 Kb