Panasonic AW-E800 manual Connection of Devices with Camera PAN/TILT Control System, Lens

Page 19

■CONNECTION OF DEVICES WITH CAMERA PAN/TILT CONTROL SYSTEM

•To connect the pan/tilt unit to the camera, use the pan/tilt unit cable AW-CA50T15.

•Power is supplied from the pan/tilt unit.

LENS IRIS Cable

OPTION CARD	VIDEO OUT
MENU	I/F REMOTE
MENU
ITEM/AWC	G/L IN
YES/ABC
	IRIS
NO/BAR

1.Before connecting them, press the power switch on the pan/tilt unit AC adaptor and the ON/OFF switch on the hybrid control panel in the OFF position, respectively.

2.Fix the camera securely to the pan/tilt unit using the mounting adaptor.

3.Connect the 50-pin end of the pan/tilt unit cable to the I/F Remote connector on the camera. Connect the 15-pin end of the cable to the pan/tilt unit.

4.Connect the pan/tilt unit to the hybrid control panel with the 10BASE-T cable and coaxial cable. For details, refer to the manual for the hybrid control panel.

5.First switch on the pan/tilt unit AC adaptor, then press the ON/OFF switch on the hybrid control panel in the ON position. The camera and pan/ tilt unit can now be controlled from the hybrid control panel.

LENS	DC12V IN
ZOOM/FOCUS Cable

Camera Mounting

Adaptor (Supplied)

Pan/tilt unit Cable

Pan/tilt unitAW-CA50T15

AW-PH300

	FUSE(POWER)	FUSE(LAMP)
	POWER
OFF	O I ON
	POWER	AC Adaptor
	POWER	AW-PS300

Pan/tilt unit AC				Video
Adaptor AW-PS300				Monitor
	Composite Video			S VIDEO
	Hybrid control
10BASE-T panel		G / L I N BREVIEW MONITOR OUT	S-VIDEO OUT	D C 1 2 V I N
Cable	AW-RP501	T D M U L T I P O R T H U B	A U X C O N T R O L

					T A L L Y
P A N / T I L T	C A M E R A
CONTROL OUT CONTROL OUT		6/1	OUT	PREVIEW	IN

	PAN/TILT CONTROL	Control Panel
Coaxial		AC Adaptor
Cable	CAMERA CONTROL	AW-PS301
Coaxial
Cable	VIDEO

-17-

Image 19

Contents Convertible Camera Model No. AW-E800 Lightning flash with arrowhead sym Contents Preface FeaturesSpecial Notes on Operation Donts PrecautionsDOS Major Operating Controls and Their Functions Cooling Fan Menu Switch MENU/MITEM/AWC Switch ITEM/AWC Lens fixing ring knobIris Connector Iris YES/ABC Switch YES/ABC/+NO/BAR Switch NO/BAR/− Video Output Connector Video OUT15. G/L Input Connector G/L 11. I/F Remote Connector I/F RemotePower Indicator DC 12 V Input Connector DC 12VLens Mounting MountingCamera Mounting Flange Back Adjustment for Zoom Lens Iris Gain Control in a Lens Automatic iris power zoom lensConnections Connection of Device with a Composite Input ConnectorWV-RC700A Connection of a Remote Control Unit RCUConnection of a Remote Control BOX RCB Lens Connection of Devices with Camera PAN/TILT Control SystemSignal BB Connection with Multiple Cameras Color Lock ModeConnection of Computer Color temperature and adjustment of white balance AdjustmentCamera Automatic White Balance Control AWCAutomatic Tracking White Balance Setting ATW Manual White Balance SettingBlack Balance Adjustment Reset to 3 200K or 5 600K White BalanceTotal Pedestal Level ADJUST- Ment Horizontal Phase Control GEN-LOCK AdjustmentColor Phase Adjustment Setting by Camera USE Mode SettingCamera RCU RCB Setting by RCU RCB or Hybrid Control PanelMain Menu Screen Menu Item SettingMenu Item Setting Main Menu of User ModeFrom the camera alone SettingFrom RCU RCB SUB Menu Halogen Mode, Fluorescent Mode, Outdoor Mode Detecting Ratio Adjustment Light PEAK/AVG P50 A50 Video Level Adjustment Picture Level -50 +50Auto ND ELC Setting Auto ND ELC ON/OFF Manual Gain Up Control Setting Manu Gain Up DB 30 dB / N/Eye 0Skin Color Adjustment Flesh Tone -3 +3 Black Level Setting Pedestal -30 +30Contrast Adjustment Contrast Gamma LOW/MID/HIGH Chroma Level Adjustment Chroma Level -3 +37Detail Select Setting DTL Select Normal/Super 4Sub Carrier Phase Coarse Adjustment SC Coarse 1/2/3/45Subcarrier Phase Fine Adjustment SC Fine -511 +511 6Color Bar Setup Setting Color Bar Set 0.0 IRE/7.5 IREPage @5Negative/Positive Selection Nega/Posi Posi/Nega @3CCD Read Out Mode Setting V Resolution Normal/FineSub Menu User Mode @9Detecting Ratio Adjustment Light PEAK/AVG P50 A50 @8Video Level Adjustment Picture Level -50 +50#1Auto Iris Level Fine Adjustment Auto Iris Adjust ON/OFF 100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 #3Electronic Shutter Step Setting Step OFF/1/100 1/10#6Gain Up Setting Gain AGC HIGH/AGC LOW/ 0 dB 30 dB / N/Eye #5CCD Read Out Mode Setting Field/Frame Field/Frame 1/FramePedestal, B Pedestal #7Black Level Setting Pedestal -30 +30#8Chroma Level Adjustment Chroma Level -3 +3 $0Highlight Chroma Setting Highlight Chroma$5Subcarrier Phase Fine Adjustment SC Fine -511 +511 $22-dimensional Lowpass Filter Setting 2D LPF$3Horizontal Phase Adjustment H Phase -206 +49 $4Subcarrier Phase Coarse Adjustment SC Coarse 1/2/3/45Corner Detail Setting Corner Detail OFF/ON 0Noise Suppress Compensation Level Setting Noise Suppress 12Dark Detail Compensation Level Setting Dark Detail 0 3Chroma Detail Compensation Level Setting Chroma Detail 01Flare Correction Level Setting Flare R/G/B 0 8Gamma Correction Level Setting Gamma 0.359Knee Compensation Level Setting Knee Point 88% 98%/Dynamic 0White Clip Level Setting White Clip 95% 110%Setting to initial set Setting to Initial SETInitial Settings of the Setting Items Factory preset values User Mode Wide AppearanceNtsc SpecificationsBack Panel MENU, ITEM/AWC, YES/ABC, NO/BAR Optional Accessories Standard AccessoriesNM1199-1010 7J1A402B

Related manuals

Manual 56 pages 23.74 Kb