Panasonic AW-E800 manual $22-dimensional Lowpass Filter Setting 2D LPF

	AUTO/ATW		PAINTING
			GAIN
		R		B
	ATW
					TOTAL	R/B Gain
	A
					PED
	B					Control
	AUTO	R	PED B
	AWC					R/B Pedestal
	ABC
	HOLD
SHUTTER		SCENE			IRIS	Control
100 500 1000S/S		USER 1	2
OFF	ELC SET		3		MAN

AUTO

RCU (RCB)

$22-dimensional Lowpass Filter Setting [2D LPF:

OFF/LOW/HIGH]

The 2D lowpass filter that reduces moire and cross color can be set.

$3Horizontal Phase Adjustment [H Phase: –206 - +49]

Horizontal phase can be adjusted when a genlock signal is supplied.

$4Subcarrier Phase Coarse Adjustment [SC Coarse: 1/2/3/4]

Coarse adjustment of subcarrier phase can be made when a genlock signal is supplied.

$5Subcarrier Phase Fine Adjustment [SC Fine: –511 - +511]

Fine adjustment of subcarrier phase can be made when a genlock signal is supplied.

$66Color Bar Setup Setting [Color Bar Set: 0.0 IRE/7.5 IRE]

The setup level of color bar can be adjusted.

$7Detail Level Setting [Detail: OFF/LOW/HIGH]

Contour correction quantity can be selected.

Detail settings made using the Horizontal/Vertical Detail Level HIGH/LOW Setting $8.

$8Horizontal/Vertical Detail Level HIGH/LOW

Setting

[H Detail Level H: +1 - +63]

[V Detail Level H: +1 - +31]

[H Detail Level L: 0 - +62]

[V Detail Level L: 0 - +30]

Detail level can be set in horizontal (H) and vertical

(V)directions with the Detail Level Setting $7at HIGH or LOW.

Whichever the direction, H or V, the set level at HIGH must be at least one position higher than that at LOW.

$9Detail Band Setting [Detail Band: 1 - 5]

A contour correction band can be set with the Detail Level Setting $7at HIGH or LOW. The higher setting, the finer will be the detail.

-43-