Panasonic AW-E800 manual 4Sub Carrier Phase Coarse Adjustment SC Coarse 1/2/3/4

!4Sub Carrier Phase Coarse Adjustment [SC Coarse: 1/2/3/4]

Coarse adjustment of subcarrier phase can be made when a genlock signal is supplied.

!5Subcarrier Phase Fine Adjustment [SC Fine: –511 - +511]

Fine adjustment of subcarrier phase can be made when a genlock signal is supplied.

!6Color Bar Setup Setting [Color Bar Set: 0.0 IRE/7.5 IRE]

The setup level of color bar can be adjusted.

!7Detail Select Setting [DTL Select: Normal/Super

DTL]

If contour correction is not sufficient at the Normal position when Detail Level setting !8is set to LOW or HIGH, select the Super DTL position.

Note

Neither Normal nor Super DTL is valid for contour correction if Detail Level setting !8is in the OFF position.

!8Detail Level Setting [Level: OFF/LOW/HIGH]

Detail level can be adjusted when Detail Select set- ting !7is at Normal. Super DTL level can be adjust- ed when it is at Super DTL.

In case of using the RCU (RCB), the above can be adjusted with the contour correction switch (DTL).

RCU (RCB)

			GAIN				DTL Switch
	RCBON			AGC			DTL
			+18		+6	BAR	HIGH
			+9		OFF		LOW
	OFF		0(dB)		− 6(dB)	CAM	OFF
AUTO/ATW				PAINTING
			R	GAIN	B
	ATW
							TOTAL
	A
							PED
	B
	AUTO		R PED		B
	AWC
	HOLD
	ABC
SHUTTER		SCENE			IRIS
120 500 1000S/S		USER 1		2
OFF	ELC SET			3	MAN
					AUTO

!9Noise Suppress Level Setting [Noise Suppress:

OFF/LOW/HIGH]

Screen noise can be reduced when Detail Level setting !8is at HIGH or LOW.

-35-