Panasonic AW-E800 manual Connection of a Remote Control BOX RCB

Page 18

■CONNECTION OF A REMOTE CONTROL BOX (RCB)

The RCB (WV-CB700A) and the camera must be con- nected with the optional RCB cable AW-CA50T10.

1.Turn RCB power off before connecting cables.

2.Connect the 50-pin connector of the RCB cable to I/F REMOTE connector of the camera. The 10-pin connector must be connected to the RCB.

3.Turn RCB power on and the camera can be con- trolled remotely by the RCB.

OPTION CARD	VIDEO OUT
MENU	I/F REMOTE
MENU

Notes:

•The monitor output signals of the RCB attenuate and deteriorate with cable length. It is recommend- ed that the signals from the monitor output be used for monitoring purposes only.

•No gen-lock signal is available from the RCB.

•If a longer distance (more than 3 m) is desired

between the camera and the RCB, use the following optional cable.

AW-CA50B10 and WV-CA10B2 (2 m) WV-CA10B25 (25 m) WV-CA10B50 (50 m)

ITEM/AWC

G/L IN

YES/ABC

IRIS

NO/BAR

DC12V IN

DC Power Cable AW-CA4T1

RCB Cable AW-CA50T10 (3 m)

Video signal IN

RCB

MONITOR OUT

OFF O I

POWER

	FUSE(POWER)
	POWER
ON	FUSE
ON	FUSE

AC Adaptor AW-PS505

AC Adaptor

AW-PS505

USER SET

ALL 1 2

RCB WV-CB700A

-16-

Image 18

Contents Convertible Camera Model No. AW-E800 Lightning flash with arrowhead sym Contents Features PrefaceSpecial Notes on Operation Precautions DontsDOS Major Operating Controls and Their Functions Lens fixing ring knob Menu Switch MENU/MITEM/AWC Switch ITEM/AWC Cooling FanVideo Output Connector Video OUT YES/ABC Switch YES/ABC/+NO/BAR Switch NO/BAR/− Iris Connector IrisDC 12 V Input Connector DC 12V 11. I/F Remote Connector I/F RemotePower Indicator 15. G/L Input Connector G/LMounting Lens MountingCamera Mounting Flange Back Adjustment for Zoom Lens Automatic iris power zoom lens Iris Gain Control in a LensConnection of Device with a Composite Input Connector ConnectionsConnection of a Remote Control Unit RCU WV-RC700AConnection of a Remote Control BOX RCB Connection of Devices with Camera PAN/TILT Control System LensConnection with Multiple Cameras Color Lock Mode Signal BBConnection of Computer Adjustment Color temperature and adjustment of white balanceAutomatic White Balance Control AWC CameraManual White Balance Setting Automatic Tracking White Balance Setting ATWReset to 3 200K or 5 600K White Balance Black Balance AdjustmentTotal Pedestal Level ADJUST- Ment GEN-LOCK Adjustment Horizontal Phase ControlColor Phase Adjustment USE Mode Setting Setting by CameraSetting by RCU RCB or Hybrid Control Panel Camera RCU RCBMain Menu of User Mode Menu Item SettingMenu Item Setting Main Menu ScreenSetting From the camera aloneFrom RCU RCB SUB Menu Halogen Mode, Fluorescent Mode, Outdoor Mode Video Level Adjustment Picture Level -50 +50 Detecting Ratio Adjustment Light PEAK/AVG P50 A50Auto ND ELC Setting Auto ND ELC ON/OFF Manual Gain Up Control Setting Manu Gain Up DB 30 dB / N/Eye Chroma Level Adjustment Chroma Level -3 +3 Black Level Setting Pedestal -30 +30Contrast Adjustment Contrast Gamma LOW/MID/HIGH 0Skin Color Adjustment Flesh Tone -3 +36Color Bar Setup Setting Color Bar Set 0.0 IRE/7.5 IRE 4Sub Carrier Phase Coarse Adjustment SC Coarse 1/2/3/45Subcarrier Phase Fine Adjustment SC Fine -511 +511 7Detail Select Setting DTL Select Normal/SuperPage @3CCD Read Out Mode Setting V Resolution Normal/Fine @5Negative/Positive Selection Nega/Posi Posi/NegaSub Menu User Mode @8Video Level Adjustment Picture Level -50 +50 @9Detecting Ratio Adjustment Light PEAK/AVG P50 A50#1Auto Iris Level Fine Adjustment Auto Iris Adjust ON/OFF #3Electronic Shutter Step Setting Step OFF/1/100 1/10 100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4#5CCD Read Out Mode Setting Field/Frame Field/Frame 1/Frame #6Gain Up Setting Gain AGC HIGH/AGC LOW/ 0 dB 30 dB / N/Eye$0Highlight Chroma Setting Highlight Chroma #7Black Level Setting Pedestal -30 +30#8Chroma Level Adjustment Chroma Level -3 +3 Pedestal, B Pedestal$4Subcarrier Phase Coarse Adjustment SC Coarse 1/2/3/4 $22-dimensional Lowpass Filter Setting 2D LPF$3Horizontal Phase Adjustment H Phase -206 +49 $5Subcarrier Phase Fine Adjustment SC Fine -511 +5113Chroma Detail Compensation Level Setting Chroma Detail 0 0Noise Suppress Compensation Level Setting Noise Suppress 12Dark Detail Compensation Level Setting Dark Detail 0 5Corner Detail Setting Corner Detail OFF/ON0White Clip Level Setting White Clip 95% 110% 8Gamma Correction Level Setting Gamma 0.359Knee Compensation Level Setting Knee Point 88% 98%/Dynamic 1Flare Correction Level Setting Flare R/G/B 0Setting to Initial SET Setting to initial setInitial Settings of the Setting Items Factory preset values User Mode Appearance WideSpecifications NtscBack Panel MENU, ITEM/AWC, YES/ABC, NO/BAR Standard Accessories Optional AccessoriesNM1199-1010 7J1A402B

Related manuals

Manual 56 pages 23.74 Kb