Panasonic AW-E800 manual Color Phase Adjustment

●COLOR PHASE ADJUSTMENT

Supply the output signal (split color bar) from the color special effect generator to a color monitor or vec- torscope. Adjust the color phase of the camera.

White	Yellow		Cyan		Green		Magenta		Red	Blue	Color bar of
											camera
											Sprit line
White	Yellow	Cyan		Green		Magenta		Red	Blue	Black	effects generator
											Color bar of special

[ADJUSTMENT by CAMERA]

1. Press the NO/BAR switch for over 5 seconds for the color bar mode.

2. Select [G/L Adjustment] on the main menu, then select [SC Coarse] on the sub menu.

3. Make coarse adjustment with the YES/ABC switch and the NO/BAR switch.

4. Select [SC Fine] on the sub menu. Perform fine adjustment with the YES/ABC switch and the NO/BAR switch.

**G/L,		@Color Bar Set**
H Phase			± 0
SC	Coarse		1
SC	Fine		± 0
Color		Bar Set	7.5IRE

Return

[ADJUSTMENT with RCU (RCB, Hybrid control panel)] Use the subcarrier phase coarse adjustment control and subcarrier phase fine control.

*It is recommended that a vectorscope be used for maximum accuracy in color phase adjustment.

-26-