uBlack Level Setting [Pedestal: –30 - +30]
The black level (pedestal) of the luminance (Y) sig- nal can be set. Used in adjusting the black levels of two or more cameras.
iContrast Adjustment [Contrast (Gamma): LOW/MID/HIGH]
Contrast can be adjusted to any of three levels.
oChroma Level Adjustment [Chroma Level: –3 - +3]
Chroma Level can be decreased or increased to any of three levels each.
!0Skin Color Adjustment [Flesh Tone: –3 - +3]
Skin color can be decreased or increased to any of three levels each.
!1White Balance Setting [White Bal: ATW/AWC A/
AWC B/P SET 3 200K/P SET 5 600K]
ATW: The white balance is automatically adjusted to be always right.
AWC A, AWC B: Once the white balance is adjust- ed with the ITEM/AWC switch on the back of the camera, it is no longer necessary to set the white balance again if you simply select AWC A or AWC B, provided that the camera is used under the same conditions.
Fine color adjustment can be made after setting AWC by red/blue gain adjustment in user mode or from the RCU (RCB).
P SET 3 200K: The white balance is adjusted to 3 200K illumination.
P SET 5 600K: The white balance is adjusted to 5 600K illumination.
Note
Neither P SET 3 200K nor P SET 5 600K can be set from the RCU (RCB) or the hybrid control panel.
!2Highlight Chroma Setting [Highlight Chroma:
OFF/LOW/HIGH]
At LOW or HIGH, the color dynamic range widens to prevent highlighted white portions from suppres- sion.
!3Horizontal Phase Adjustment
[H Phase: –206 - +49]
Horizontal phase can be adjusted when a genlock signal is supplied.