#7Black Level Setting [Pedestal: –30 - +30]
The black level (pedestal) of the luminance (Y) sig- nal can be set. Used in adjusting the black levels of two or more cameras.
#8Chroma Level Adjustment [Chroma Level: –3 - +3]
Chroma Level can be decreased or increased to three levels.
#9White Balance Setting [White Bal: ATW/AWC A/
AWC B/P SET 3 200K/P SET 5 600K]
ATW: The white balance is automatically adjusted to the optimum position.
AWC A, AWC B: Color temperature conditions at two points can be stored at AWC A and AWC B. Once the white balance is adjusted with the ITEM/AWC switch on the back of the camera, it is no longer necessary to set the white balance again if you simply select AWC A or AWC B, provided that the camera is used under the same conditions.
Fine color adjustment can be made after setting AWC by red/blue gain adjustment in Painting Setting $1or from the RCU (RCB).
P SET 3 200K: The white balance is adjusted to 3 200K illumination.
P SET 5 600K: The white balance is adjusted to 5 600K illumination.
Note
Neither P SET 3 200K nor P SET 5 600K can be set from the RCU (RCB) or the hybrid control panel.
$0Highlight Chroma Setting [Highlight Chroma:
OFF/LOW/HIGH]
At LOW or HIGH, the color dynamic range widens to prevent highlighted white portions from suppres- sion.
$1Painting Setting [Painting: R Gain, B Gain,
R Pedestal, B Pedestal:
Fine adjustment of the white balance can be made after AWC setting when AWC A or AWC B is selected in White Balance Setting #9. In case of using the RCU (RCB), use the R/B gain con- trols for this purpose. The set value returns to ±0 after AWC setting in using the camera alone.
R Pedestal, B Pedestal:
Fine adjustment of the black balance can be made after ABC setting.
In case of using the RCU (RCB), use the R/B pedestal controls for this purpose. The set value returns to ±0 after ABC setting in using the camera alone.