Panasonic AW-E800 manual 8Gamma Correction Level Setting Gamma 0.35

(G-R):To increase or decrease the intermediate color between green and cyan

(G-B):To increase or decrease yellowish green

(B-R):To increase or decrease the intermediate color between blue and cyan

(B-G):To increase or decrease purple

%8Gamma Correction Level Setting [Gamma: 0.35 - 0.55]

Gamma correction level can be set.

%9Knee Compensation Level Setting [Knee Point: 88% - 98%/Dynamic]

88% - 98%: The level of video signals subject to knee compensation (knee point) can be set.

Dynamic: Knee compensation level is automatically adjusted according to the scene.

^0White Clip Level Setting [White Clip: 95% - 110%]

The peak level of video signals to be white-clipped can be set.

^1Flare Correction Level Setting [Flare R/G/B: 0 - 100]

Flare correction level can be adjusted.

*Flare correction level has already been adjusted prior to shipment from the factory.

^2Black Stretch Setting [Black Stretch: ON/OFF]

Black stretch to correct the suppression of black portions at low luminance can be set to ON or OFF.

^3PC Control Access Speed Setting [Baud Rate: 1 200bps/2 400bps/4 800bps/9 600bps]

This setting is to select a communication speed in controlling the camera from the computer.

^4Negative/Positive Selection [Nega/Posi:

Posi/Nega]

Posi: Normal image

Nega: Image is shown reversed in darkness and color.

Note

When an option card is added, only the composite output and Y/C output will be reproduced in nega- tive image.

^5Aspect Ratio Selection [Aspect Ratio: 16:9/4:3]

^6Fan ON/OFF [Fan: ON/OFF]

The cooling fan can be turned off if fan noise is dis- turbing in a studio, for example.

-45-