Page 12 | AXIS 215 |
Resetting to factory default settings
This will reset all parameters, including the IP address, to the factory default settings:
1.Remove the dome and the black ring by loosening the 4 screws for the dome, and unscrewing the 4 screws for the black ring.
2.Disconnect power from the camera by removing the power connector.
3.Press and hold the Control button and reconnect the power connector.
4.Keep the Control button pressed until the Status indicator displays amber (this may take up to 15 seconds), then release the button.
5.When the Status indicator displays green (which can take up to 1 minute) the process is complete and the camera has been reset.
6.
power connector
control button
It is also possible to reset parameters to the original factory default settings via the web interface. For more information, please see the online help or the user’s manual.
Further information
The user’s manual is available from the Axis Web site at www.axis.com or from the Axis Network Video Product CD supplied with this product.
Tip!
Visit www.axis.com/techsup to check if there is updated firmware available for your
AXIS 215