Page 4 | AXIS 215 |
Overview
Wall bracket screws
Sunshield screws
Sunshield
Dome
Wall bracket
Before installation
Before Installation, it is important to remove all packing material from the camera according to the steps below. Do not start the camera until all packing has been removed, or the camera will be damaged.
1.Place the AXIS 215
2.Loosen the four screws holding the dome (using the 3mm allen key). Make sure the
3.Carefully unwrap the AXIS 215
Screws for dome
Packing between housing and sunshield
4. Carefully remove the packing between the housing and sunshield. See illustration above.
5.Remove the plastic protection from the desiccant bags.
6.Fold the ends of the desiccant bags and place them in the empty slots.
7.Attach the dome and tighten the four screws firmly.
Place desiccant bag here | Place desiccant bag here | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|