Rotel RDV-995 owner manual Troubleshooting, Symptom Possible case Remedy

RDV-995DVD Player 26

Troubleshooting

What appears to be a malfunction may not always be serious. Please go through the following list before requesting service.

Symptom	Possible case	Remedy
Power does not come on.	Power plug is not inserted securely.	Plug in securely.
Remote control does not work.	Too far from the unit.	Move closer to the unit.
	The tip of the remote unit is not	Point the infrared light-emitting window
	pointed in the right direction.	toward the remote sensor on the front panel.
	Batteries are exhausted.	Replace the batteries with new ones.
	Battery polarity is incorrect.	Take out the batteries and insert them again
		in the correct direction.
No picture is displayed on the	Connection of video cable is	Connect the cable correctly.
monitor.	incorrect.
	Input selection of TV is incorrect.	Select correctly.
	Disc is not playable.	Use a playable disc. (See page 11.)
Picture is noisy.	The unit is connected to a VCR	Connect the unit so that the picture signal
	directly and the copyguard function	flows directly to the TV.
	is activated.
No audio is reproduced.	Connection is incorrect.	Check the connections.
	Input selection of amplifier is	Select correctly.
	incorrect.
No audio is reproduced when	The audio signal derives from the	Use the AUDIO OUT when playing back such
playing back a DVD disc recorded	unit's DIGITAL OUT.	discs.
with 96-kHz, linear PCM audio.
Sound is distorted or noise is	Disc is dirty.	Wipe the disc surface.
generated.
Picture is garbled.	The screen saver mode is set to	Set the screen saver mode to the other mode.
	MODE 1, and the screen saver
	function is activated.
Picture does not fit the television	MONITOR TYPE is not correctly set.	Select monitor type correctly. (See page 22.)
screen.
	Television is not correctly set.	Set the television correctly.
Operation is not possible.	Microcomputer malfunctions due to	Turn off the power and unplug the power
	lightning or static electricity.	cord, then connect the power cord again.
	Moisture condensation occurs by a	Turn off the power, then turn it on a few
	sudden change of temperature or	hours later.
	humidity.