Blaupunkt SD48 7 648 001 310, SD48 7 648 000 310 Tuning into a station, Storing stations

Radio mode

Tuning into a station

There are various ways of tuning into a sta- tion:

Automatic station seek tuning

￿Press the or button 2.

The radio tunes into the next receivable station.

Tuning into stations manually

You can also tune into stations manually.

Note:

You can only tune into stations manu- ally if the convenient RDS function and RDY are deactivated.

￿Press the or button 2.

Browsing through broadcasting networks (FM only)

If radio stations provide several pro- grammes, you have the option of browsing through these so-called "broadcasting net- works".

Note:

The convenient RDS function and PTY must be activated before you can use this feature.

￿Press the or button 2 to switch to the next station on the broadcasting network.

Note:

When using this feature, you will only be able to switch to stations that you have received once before already. To receive the stations, use the Scan or Travelstore function.

Adjusting the sensitivity of the station seek tuning (SENS)

You can choose whether the radio should only tune into stations providing good re- ception or whether it can also tune into

those with a weak reception.	ENGLISH
￿ Press the MENU button >.
The display shows "MENU".
￿ Press the or button 2 repeatedly
until "SENS" and the currently set value
appears on the display.

"SENS HI6" means that the tuner is set to the highest sensitivity setting. "SENS LO1" means it is set to the lowest sensitivity set- ting.

￿Press the button 2 to open the sub- menu.

￿Set the desired sensitivity level using

the or button 2.

When you have finished making your chang- es,

￿press the MENU button >. To exit the menu,

￿press the ESC button <.

Note:

You can set different sensitivity levels for FM and AM (MW/LW).

Storing stations

Storing stations manually

￿Select the desired memory bank (FM1, FM2, FMT) or one of the wavebands (MW or LW).

￿Tune into the desired station.

53