Adjusting the volume
When you have finished making your chang- es,
press the MENU button >. To exit the menu,
press the ESC button <.
Switching the confirmation beep on/off (BEEP)
The system will output a confirmation beep for some functions if you keep a button pressed down for longer than two seconds, for instance, when assigning a radio station to a station preset button. You can switch the beep on or off.
Press the MENU button >. The display shows "MENU".
Press the 
or 
button 2 repeatedly until "BEEP ON" or "BEEP OFF" appears on the display.
Press the 
button 2 to call up the submenu.
Switch the beep on or off using the
button 2. "OFF" means beep off, "ON" means beep on.
When you have finished making your chang- es,
press the MENU button >. To exit the menu,
press the ESC button <.
Muting during telephone mode
If your car sound system is connected with a cell phone or navigation system, the car sound system is muted when a call is incom- ing or during a voice output of the naviga- tion. The call or the voice output is played back via the loudspeakers of the card sound system. In order for this feature to work, the mobile telephone or navigation system must be connected to the car sound system as described in the installation instructions.
You can find out from your Blaupunkt dealer which navigation systems can be used with your car sound system.
If a call is incoming or a navigation an- nouncement takes place, the display shows "TELEPHONE".
Telephone Audio/Navigation Audio
During a telephone call or a voice output of the navigation, no traffic announcements are switched through.
You can set the volume level at which the telephone calls or navigation announce- ments are mixed in.
Press the MENU button >. The display shows "MENU".
Press the
or 
button 2 repeatedly until "TEL VOL" appears on the display.
Press the 
button 2 to call up the submenu.
"TELVOL" and the currently set value are displayed.
Set the desired volume with the 
or 
button 2.
50