Blaupunkt SD48 7 648 000 310 Listening to stored stations, Scanning receivable stations Scan

Radio mode

￿Press and hold down one of the station buttons 1 - 5 8 for longer than two seconds to assign the station to that button.

Storing stations automatically (Travelstore)

You can automatically store the five sta- tions offering the strongest reception in the region (only FM). The stations are stored in the FMT memory bank.

Note:

Any stations that were previously stored in this memory bank are deleted in the process.

￿Press and hold down the BND•TS but- ton 5 for longer than two seconds.

The storing procedure begins. "FM TSTORE" appears on the display. After the process has completed, the radio will play the sta- tion that is stored in memory location 1 of the FMT memory bank.

Listening to stored stations

￿Select the memory bank or waveband.

￿Press the station button 1 - 5 8 of the desired station.

Scanning receivable stations (SCAN)

You can use the scan function to play all the receivable stations briefly. You can set the scanning time from 5 to 30 seconds in the menu (in increments of 5 seconds).

Starting SCAN

￿Press and hold down the MENU button > for longer than two seconds.

Scanning begins. "SCAN" and the station name or the frequency appear intermittent- ly on the display.

Cancelling the SCAN and continuing to listen to a station

￿Press the MENU button >.

Scanning stops and the radio continues playing the station that it tuned into last.

Setting the scanning time (SCAN TIME)

￿Press the MENU button >. The display shows "MENU".

￿Press the or button 2 repeatedly until "SCAN TIME" appears on the dis- play.

￿Press the button 2 to open the sub- menu.

"SCAN" and the currently set value are dis- played.

￿Set the desired scan time using the

or button 2.

When you have finished making your chang- es,

￿press the MENU button >. To exit the menu,

￿press the ESC button <.

Note:

The adjusted scan time also applies to scan processes in MP3/WMA mode.

54