Blaupunkt SD48 7 648 000 310, SD48 7 648 001 310 installation instructions Adjusting E-XBASS

X-Bass

￿Press the or button 2 repeatedly until "X-BASS" appears on the display.

￿Press the button 2 to call up the submenu.

"X-BASS" and the currently set value are displayed.

￿Press the or button 2 repeatedly until the desired setting appears on the display.

When you have finished making your chang- es,

￿press the MENU button >. To exit the menu,

￿press the ESC button <.

Adjusting E-XBASS

In the "E-XBASS" submenu, you can also ad- just the cut-off frequency in addition to the X-BASS boost. You can select whether the increase should affect the entire X-BASS frequency range (setting "FLAT") or pur- posefully only one of three X-BASS frequen- cies (400 Hz, 800 Hz, 2400 Hz).

￿Press the MENU button >. The display shows "MENU".

￿Press the or button 2 repeatedly until "AUDIO" appears on the display.

￿Press the button 2 to call up the audio menu.

"BASS" appears on the display.

￿Press the or button 2 repeatedly until "ENHANCED" appears on the dis- play.

￿Press the button 2 to call up the submenu.

"E-BASS" appears on the display.

￿Press the or button 2 repeat- edly until "E-XBASS" appears on the display.

￿Press the button 2 to call up the submenu.

"GAIN" and the currently set value are dis- played.

￿Press the or button 2 to select between "GAIN" (X-BASS boost) and "FREQ" (frequency).

￿Press the or button 2 to change the selected setting.

When you have finished making your chang- es,

￿press the MENU button >. To exit the menu,

￿press the ESC button <.

70