Alpine owner manual Installing Sound Manager for PXA-H800, Start Sound Manager for PXA-H800

Page 11

Installing Sound Manager for PXA-H800

When you install Sound Manager for PXA-H800 on a PC, you can set/ adjust the audio settings on the PC.

Caution before installing:

•This Program runs under Microsoft® Windows® XP, Vista, 7 only.

Recommended specifications

OS: Windows XP, Windows Vista , Windows 7

CPU: 1.6 GHz or higher

Memory: 1 GB or higher

HDD: 512 MB or more available space

Display: 1024×576 or higher

•Install the Sound Manager software for PXA-H800 before connecting the PXA-H800 to your personal computer.

•Before installing, all active programs must be stopped.

1 Insert the supplied CD-ROM (Sound Manager for PXA-H800) into the CD-ROM drive. Run the setup.exe file. Follow the installation instructions on the screen.

2 Connect a PC to Computer connection terminal of PXA-H800 with the included USB cable.

USB Cable

•Install the PXA-H800 in your vehicle before you connect a PC to it (refer to the Installation manual). Turn the ignition key to the ACC or ON position.

3 Start Sound Manager for PXA-H800.

CAUTION

•Strictly observe the Warnings and Cautions written by the manufactures of your PC and peripheral equipment.

•We do not accept responsibility for data lost due to the incorrect operation of the Sound Manager for PXA-H800. We recommend you to back-up your important data regularly.

About the OFFLINE mode

Sound Manager for PXA-H800 checks the connection with the PXA- H800 at startup. When the connection is detected, it starts in the online mode. If the connection is not detected, a message will be displayed.

To start the PXA-H800 in the offline mode, click [OFFLINE]. To set in the offline mode, perform the following steps to reflect the settings on the PXA-H800.

1 After making adjustments and settings, save the data on the PC, referring to “Saving the Setup Data (File)” (page 10).

2 Close Sound Manager for PXA-H800.

3 Connect to the PXA-H800 to your PC and start Sound Manager for PXA-H800 in the online mode.

•Install the PXA-H800 in your vehicle before you connect a PC to it (refer to the Installation manual). Turn the ignition key to the ACC or ON position.

4 Load the data saved on the PC referring to “Loading the Setup Data (File)” on page 10.

The settings of Sound Manager for PXA-H800 are reflected on the PXA-H800.

9-EN

Image 11

Contents PXA-H800 Page From a PC From the Commander Information Operating Instructions From a PC From the Commander Function list How to Read this ManualSound Manager for PXA-H800 Location of ControlsPXA-H800 RUX-C800 Commander sold separately About Operating FeaturesAbout the Audio Setting Before You First Use the UnitStart Sound Manager for PXA-H800 Installing Sound Manager for PXA-H800About the Offline mode Before installing, all active programs must be stoppedOperating the Sound Manager for PXA- H800 Menu Using with Ai-NET ConnectionsTurning Power On and Off Initial System Start-UpViewing the Version Information Option Audio AdjustmentLoading the ImprintEQ Measurement Data File Downloading the Software OptionStoring the Preset Values Preset Store Setting DefeatSwitching the Sources 13-EN Recalling a Stored Setting Preset CallSetting the Speaker System Output System Select 14-EN Setting the Speakers Speaker Setup/ Setting the SubwoofersSetting the AUX Input System AUX Input System Select Adjusting the AUX Volume level AUX Level Setting the AUX Input AUXSetting the Digital Input Digital AUX Setting the AUX Volume Input level AUX in Gain16-EN Before Performing Automatic MeasurementNaming the AUX Input AUX Name 17-EN Setting ImprintEQ18-EN 19-EN Adjusting and Saving the Target CurveTurning ImprintEQ On/Off Saving ImprintEQ Measurement Data on aClick Auto TCR for Shortcut tab in the main menu Adjusting the Time Correction Automatically Auto TCRAdjusting for Road Noise RoadEQ 20-ENClick on or OFF for RoadEQ When you click ON, select the levelTurning RoadEQ On/Off 21-EN22-EN Setting MX Plus Ai-NET ModeSetting MX Plus Standalone Mode 23-EN Setting the Graphic EQDisplaying the data Click Show All Data Click a frequency and drag up or down to adjust the levelTo adjust another channel, repeat Steps 4 through 24-ENClick P.EQ in the main menu Setting the Parametric EQ25-EN Click P.EQ for Shortcut tab in the main menuCrossover X-Over Adjusting X-Over and Switching the PhasesAbout the Crossover X-Over 26-ENArrow indicating the dragging direction appears Click the indicator of Show27-EN 28-EN Adjusting the Time Correction TCRCalculation of time correction Entering the time correctionClick either cm or inch Setting contents 0.00 to 20.00 ms in 0.05 ms stepsSetting contents Inch 29-EN30-EN Setting Euphony EuphonyClick Multi Channel Manager of the Function switching tab Set and adjust 2ch Playback Mode, EUPHONY, Dolby Pro Logic31-EN Using Dolby Pro Logic II Dolby Pro Logic32-EN Multi Channel Function Adjustment ProcedureMulti Channel Setup 33-EN Adjusting the Speaker Volume Level Output LevelAdjusting the Acoustic Image BI Mixing the Low Range Audio for the Rear Rear Mix34-EN Setting the Linear PCM PCM ModeAchieving Powerful High Volume Sound Listening Mode Adjusting the DVD Level DVD Level35-EN Adjusting Subwoofer SubwooferNavigation Audio Volume Adjustment Setting Defeat Defeat Adjusting the MX Plus Level MX Plus SETUP/LEVEL AdjustmentAdjusting Balance Between Left and Right Balance Adjusting Fader Between Front and Rear Fader37-EN Setting the Speaker System System SelectOFF/ON Setting the Speakers Speaker SetupSetting the Subwoofer Output SW Channel 38-EN39-EN Setting the AUX Input System AUX Input SetupSetting the AUX Input AUX 40-EN Setting the Digital Input Digital AUXSetting the AUX Volume Input Level AUX in Gain Adjusting the AUX Volume Level AUX LevelNaming the AUX Input AUX Name Mixing Navi Audio Guidance Navi Mix SetupRotate the Rotary encoder to make adjustment When the setting is complete, pressPress and hold FUNC. for at least 2 seconds Turning ImprintEQ On/Off42-EN Be sure to read before performing the automatic measurementPress the Rotary encoder When Finished appears, press Rotary encoder43-EN 44-EN Setting the MX Plus Ai-NET ModePress twice to go back to the screen for Step Setting the MX Plus Standalone ModeTo adjust another source, press and repeat Steps 8 through 45-ENG-EQ screen is displayed Setting the Equalizer Mode EQ Mode46-EN 47-EN Select the channel you want to adjust by pressing ChannelHz to 200 Hz in 1/6 octave steps 48-ENBand FRONT/REAR/CENTER 1 to Hz to 20kHz in 1/6 octave stepsFront L MID Front R MID 49-ENFront LOW Rear Center SUBWOOFER*1 Front High TCR screen is displayed 50-EN51-EN Setting the Time Correction Adjustment Unit TCR ParameterTo adjust another channel, repeat Steps 9 through 52-EN Setting the 2-Channel Signal Playback Mode ModeSetting Euphony Euphony Dolby Plii screen is displayed Using Dolby Pro Logic II Dolby Plii53-EN Select the channel by pressing Channel Adjusting the Speaker Volume Level Output Level54-EN 55-EN Adjusting the Acoustic Image BIMixing the Low Range Audio for the Rear Rear Mix 56-EN Setting the Linear PCM PCM ModeAchieving Powerful High Volume Sound Listening Mode Adjust the frequency by rotating the Rotary encoder57-EN Adjusting the DVD Level DVD LevelLowering Volume Quickly Mute Turning the Back Light Off Black OUT function58-EN Adjusting the Brightness Level of the Display Dimmer LevelAdjusting the Brightness of the Display Dimmer Press View Switching the DisplayDisplay mode switches for every push 59-ENInput System System Configuration60-EN Output System61-EN Terminology62-EN Indication Commander RUX-C800Case of Difficulty 63-EN SpecificationsComponents Dimensions64-EN