Alpine PXA-H800 Adjusting the MX Plus Level MX Plus SETUP/LEVEL Adjustment, Setting Defeat Defeat

Page 38

From the Commander

Adjusting the MX Plus Level (MX PLUS SETUP/LEVEL ADJUSTMENT)

Adjust the MX Plus level. In the Ai-NET mode, the adjustment is performed for the current source (Initial setting: “OFF” / “Non Effect”).

When an Ai-NET compatible head unit is connected:

Setting item:

DVD: OFF/Cinema/Action/Music

 

AUX/Others: OFF/Compressed/Music/

 

DVD

 

CD/Compressed Data/FM/Digital Radio:

 

OFF/Level1/Level2/Level3

When an Ai-NET compatible head unit is not connected:

Setting item:

Non Effect/Compressed 1/Compressed 2/

 

Compressed 3/Music 1/Music 2/Music 3/

 

Cinema/Action/Drama/Talk

For MX Plus, refer to “Setting the MX Plus (Ai-NET Mode)”

(page 44) and “Setting the MX Plus (Standalone Mode)” (page 45).

Adjusting Balance (Between Left and Right) (BALANCE)

Adjust the Right and Left speaker volume (Initial setting: “0”).

Setting contents: L (Left) 15 to 0 (Center) to R (Right) 15

When an Ai-NET compatible head unit is connected, the audio settings are adjusted at the head unit and you cannot set them on the unit itself.

Adjusting Fader (Between Front and Rear) (FADER)

Adjust the Front and Rear speaker volume (Initial setting: “0”).

Setting contents: F (Front) 15 to 0 (Center) to R (Rear) 15

When an Ai-NET compatible head unit is connected, the audio settings are adjusted at the head unit and you cannot set them on the unit itself.

Setting Defeat (DEFEAT)

When is set to “ON”, the settings for ImprintEQ, Graphic EQ, Parametric EQ, MX Plus, RoadEQ, and Time Collection are restored to the initial values (Initial setting: “OFF”).

Setting contents: ON/OFF

Adjusting Volume (VOLUME)

Adjust the volume (Initial setting: “-dB”).

Setting contents: -to 0.0 dB

When an Ai-NET compatible head unit is connected, the audio settings are adjusted at the head unit and you cannot set them on the unit itself.

Switching the Sources

The unit accepts up to five analog signal input lines and 2 digital signal input lines. For the connection, refer to the installation manual.

When an Ai-NET compatible head unit is connected, the source should be switched at the head unit. This feature is disabled on the Commander.

1 Press [SOURCE].

Each push switches the source.

AUX1 AUX2 AUX3 Ai-NET(HU) Ai-NET(CHG)

DIGITAL1 DIGITAL2 AUX1

The number of analog signal inputs varies depending on the setting in “Setting the AUX Input System (AUX Input Setup)” (page 39).

Only the sources set as ON in “Setting the AUX Input (AUX IN)” (page 39) and “Setting the Digital Input (Digital AUX)” (page 40) are displayed.

Names selected in “Naming the AUX Input (AUX Name)” (page 41) are displayed as the source names.

Storing the Preset Values (Preset Store)

You can store up to 6 sets of the adjustment/setting values. All of the following adjustment/setting values are stored in a single preset memory.

Adjustment/Setup items

Pages

Setting the Speaker System (System Select)

37

 

 

Setting the Speakers(Speaker Setup)

38

 

 

Setting the Subwoofer Output (SW Channel)

38

 

 

Setting the AUX Input System (AUX Input Setup)

39

 

 

Setting the AUX Input (AUX IN)

39

 

 

Setting the Digital Input (Digital AUX)

40

 

 

Setting the AUX Volume Input Level (AUX IN Gain)

40

 

 

Adjusting the AUX Volume Level (AUX Level)

40

 

 

Naming the AUX Input (AUX Name)

41

 

 

Turning ImprintEQ On/Off

42

 

 

Turning RoadEQ On/Off

43

 

 

Setting the MX Plus (Ai-NET Mode)

44

 

 

Setting the MX Plus (Standalone Mode)

45

 

 

Setting the Equalizer Mode (EQ Mode)

46

 

 

Setting the Graphic EQ

46

 

 

Setting the Parametric EQ

47

 

 

Adjusting X-Over and Switching the Phases

49

 

 

Adjusting the Time Correction (TCR)

50

 

 

Setting the 2-Channel Signal Playback Mode (Mode)

52

 

 

Setting EUPHONY (EUPHONY)

52

 

 

Using Dolby Pro Logic II (Dolby PLII)

53

 

 

Adjusting the Center Width (Center Width)

53

 

 

Adjusting the Speaker Volume Level (Output Level)

54

 

 

Adjusting the Acoustic Image (BI-PHANTOM)

55

 

 

Mixing the Low Range Audio for the Rear (Rear Mix)

55

 

 

Mixing the Low Range Audio of the Center with the Front

56

L/R (Center Bass Split)

 

 

 

Setting the Linear PCM (PCM Mode)

56

 

 

Achieving Powerful High Volume Sound (Listening Mode)

56

 

 

Adjusting the DVD Level (DVD Level)

57

 

 

1 Adjust the value you want to store and set it.

2 Press [FUNC.].

3 Rotate the [Rotary encoder] to select “Preset,” and then press the [Rotary encoder].

4 Rotate the [Rotary encoder] to select “Store,” and then press the [Rotary encoder].

36-EN

Image 38
Contents PXA-H800 Page From a PC From the Commander Information Operating Instructions How to Read this Manual From a PC From the Commander Function listSound Manager for PXA-H800 Location of ControlsPXA-H800 RUX-C800 Commander sold separately Before You First Use the Unit FeaturesAbout the Audio Setting About OperatingBefore installing, all active programs must be stopped Installing Sound Manager for PXA-H800About the Offline mode Start Sound Manager for PXA-H800Initial System Start-Up Using with Ai-NET ConnectionsTurning Power On and Off Operating the Sound Manager for PXA- H800 MenuDownloading the Software Option Audio AdjustmentLoading the ImprintEQ Measurement Data File Viewing the Version Information OptionStoring the Preset Values Preset Store Setting DefeatSwitching the Sources 13-EN Recalling a Stored Setting Preset CallSetting the Speaker System Output System Select 14-EN Setting the Speakers Speaker Setup/ Setting the SubwoofersSetting the AUX Input System AUX Input System Select Setting the AUX Volume Input level AUX in Gain Setting the AUX Input AUXSetting the Digital Input Digital AUX Adjusting the AUX Volume level AUX Level16-EN Before Performing Automatic MeasurementNaming the AUX Input AUX Name Setting ImprintEQ 17-EN18-EN Saving ImprintEQ Measurement Data on a Adjusting and Saving the Target CurveTurning ImprintEQ On/Off 19-EN20-EN Adjusting the Time Correction Automatically Auto TCRAdjusting for Road Noise RoadEQ Click Auto TCR for Shortcut tab in the main menu21-EN When you click ON, select the levelTurning RoadEQ On/Off Click on or OFF for RoadEQ22-EN Setting MX Plus Ai-NET ModeSetting MX Plus Standalone Mode Setting the Graphic EQ 23-EN24-EN Click a frequency and drag up or down to adjust the levelTo adjust another channel, repeat Steps 4 through Displaying the data Click Show All DataClick P.EQ for Shortcut tab in the main menu Setting the Parametric EQ25-EN Click P.EQ in the main menu26-EN Adjusting X-Over and Switching the PhasesAbout the Crossover X-Over Crossover X-OverArrow indicating the dragging direction appears Click the indicator of Show27-EN Entering the time correction Adjusting the Time Correction TCRCalculation of time correction 28-EN29-EN Setting contents 0.00 to 20.00 ms in 0.05 ms stepsSetting contents Inch Click either cm or inchSet and adjust 2ch Playback Mode, EUPHONY, Dolby Pro Logic Setting Euphony EuphonyClick Multi Channel Manager of the Function switching tab 30-ENUsing Dolby Pro Logic II Dolby Pro Logic 31-EN32-EN Multi Channel Function Adjustment ProcedureMulti Channel Setup Mixing the Low Range Audio for the Rear Rear Mix Adjusting the Speaker Volume Level Output LevelAdjusting the Acoustic Image BI 33-ENAdjusting the DVD Level DVD Level Setting the Linear PCM PCM ModeAchieving Powerful High Volume Sound Listening Mode 34-EN35-EN Adjusting Subwoofer SubwooferNavigation Audio Volume Adjustment Adjusting Fader Between Front and Rear Fader Adjusting the MX Plus Level MX Plus SETUP/LEVEL AdjustmentAdjusting Balance Between Left and Right Balance Setting Defeat DefeatSetting the Speaker System System Select 37-EN38-EN Setting the Speakers Speaker SetupSetting the Subwoofer Output SW Channel OFF/ON39-EN Setting the AUX Input System AUX Input SetupSetting the AUX Input AUX Adjusting the AUX Volume Level AUX Level Setting the Digital Input Digital AUXSetting the AUX Volume Input Level AUX in Gain 40-ENWhen the setting is complete, press Mixing Navi Audio Guidance Navi Mix SetupRotate the Rotary encoder to make adjustment Naming the AUX Input AUX NameBe sure to read before performing the automatic measurement Turning ImprintEQ On/Off42-EN Press and hold FUNC. for at least 2 secondsPress the Rotary encoder When Finished appears, press Rotary encoder43-EN Setting the MX Plus Ai-NET Mode 44-EN45-EN Setting the MX Plus Standalone ModeTo adjust another source, press and repeat Steps 8 through Press twice to go back to the screen for StepG-EQ screen is displayed Setting the Equalizer Mode EQ Mode46-EN Select the channel you want to adjust by pressing Channel 47-ENHz to 20kHz in 1/6 octave steps 48-ENBand FRONT/REAR/CENTER 1 to Hz to 200 Hz in 1/6 octave stepsFront L MID Front R MID 49-ENFront LOW Rear Center SUBWOOFER*1 Front High 50-EN TCR screen is displayed51-EN Setting the Time Correction Adjustment Unit TCR ParameterTo adjust another channel, repeat Steps 9 through 52-EN Setting the 2-Channel Signal Playback Mode ModeSetting Euphony Euphony Dolby Plii screen is displayed Using Dolby Pro Logic II Dolby Plii53-EN Select the channel by pressing Channel Adjusting the Speaker Volume Level Output Level54-EN 55-EN Adjusting the Acoustic Image BIMixing the Low Range Audio for the Rear Rear Mix Adjust the frequency by rotating the Rotary encoder Setting the Linear PCM PCM ModeAchieving Powerful High Volume Sound Listening Mode 56-ENTurning the Back Light Off Black OUT function Adjusting the DVD Level DVD LevelLowering Volume Quickly Mute 57-EN58-EN Adjusting the Brightness Level of the Display Dimmer LevelAdjusting the Brightness of the Display Dimmer 59-EN Switching the DisplayDisplay mode switches for every push Press ViewOutput System System Configuration60-EN Input SystemTerminology 61-EN62-EN Indication Commander RUX-C800Case of Difficulty Specifications 63-ENComponents Dimensions64-EN