Alpine PXA-H800 owner manual Setting the MX Plus Standalone Mode, 45-EN

Page 47

6 Press [ ] twice to go back to the screen for Step 3.

7 Rotate the [Rotary encoder] to select “Level Adjustment,” and then press the [Rotary encoder].

8 Select the source for the head unit by rotating the [Rotary encoder], and press the [Rotary encoder].

CD/Compressed Data/FM/Digital Radio/DVD/AUX/Others

9 Select the level you want by rotating the [Rotary encoder], and press the [Rotary encoder].

MX Plus level increases in the following order: 1 2 3.

FM (Level 1 to 3, OFF):

The medium to high frequencies become clearer, and produces well balanced sound at all frequencies.

CD (Level 1 to 3, OFF):

CD mode processes a large amount of data during playback.

MX takes advantage of this large data quantity to reproduce a more clear, clean output.

Compressed Data/Digital Radio (Level 1 to 3, OFF):

This corrects information that was lost at the time of compression. This reproduces a well-balanced sound close to the original.

DVD (Cinema, Action, Music, OFF):

Cinema:

Movie dialogue is clearly reproduced. Action movies are reproduced with more powerful sound.

Action:

Action movies are reproduced with more powerful sound.

Music:

Lower register sounds (drums, bass, etc.) and vocals are emphasized for clean and clear output.

AUX / Others (Compressed, Music, DVD, OFF):

MX mode suitable for the media (Compressed Data, Music, DVD) can be selected.

10 To adjust another source, press [ ] and repeat Steps 8 through 9.

You can listen with Defeat OFF (adjusted setup values) or with Defeat ON (Initial value) to compare, by following the steps below.

1Press and hold the [Rotary Encoder] for 2 seconds or longer while in the adjustment mode.

2Rotate the [Rotary Encoder] to switch on/off Defeat, and listen to compare.

3To exit, select “OFF” and then press [ ].

11 When the setting is complete, press and hold [ ] for at least 2 seconds.

If [ ] is pressed during setting, the unit returns to the previous item.

To enable this function, Defeat should be is set to ON.

After the setting, it is recommended to store the setting contents on the unit. For details, refer to “Storing the Preset Values (Preset Store)” (page 36).

From the Commander

Setting the MX Plus (Standalone Mode)

MX (Media Xpander) Plus enhances the vocal and instrumental sounds for music sources such as radio/CD/MP3, by generating harmonics lost during digital processing. This high frequency compensation adds clarity and detail normally lost to road noise.

In the Standalone mode, MX Plus does not become linked with the source of the head unit. MX Plus should be set for each external input. MX Plus mode will be switched, linked with the source switching of PXA-H800.

1 Press [FUNC.].

2 Rotate the [Rotary encoder] to select “MX Plus,” and then press the [Rotary encoder].

3 Rotate the [Rotary encoder] to select “MX Plus Setup,” and then press the [Rotary encoder].

4 Rotate the [Rotary encoder] to select “ON,” and then press the [Rotary encoder].

When you select [OFF], MX Plus for all music sources becomes disabled.

If an Ai-NET compatible head unit is connected, go to Step 5.

If an Ai-NET compatible head unit is not connected, go to Step 6.

5 Rotate the [Rotary encoder] to select “Standalone,” and then press the [Rotary encoder].

When a head unit without the MX Plus linking function is connected, this should be set as “Standalone,” even if it is an Ai-NET compatible head unit.

6 Press [ ] once or twice to go back to the screen for Step 3.

7 Rotate the [Rotary encoder] to select “Level Adjustment,” and then press the [Rotary encoder].

8 Select the source for each external input by rotating the [Rotary encoder], and press the [Rotary encoder].

45-EN

Image 47
Contents PXA-H800 Page From a PC From the Commander Information Operating Instructions From a PC From the Commander Function list How to Read this ManualSound Manager for PXA-H800 Location of ControlsPXA-H800 RUX-C800 Commander sold separately About Operating FeaturesAbout the Audio Setting Before You First Use the UnitStart Sound Manager for PXA-H800 Installing Sound Manager for PXA-H800About the Offline mode Before installing, all active programs must be stoppedOperating the Sound Manager for PXA- H800 Menu Using with Ai-NET ConnectionsTurning Power On and Off Initial System Start-UpViewing the Version Information Option Audio AdjustmentLoading the ImprintEQ Measurement Data File Downloading the Software OptionStoring the Preset Values Preset Store Setting DefeatSwitching the Sources 13-EN Recalling a Stored Setting Preset CallSetting the Speaker System Output System Select 14-EN Setting the Speakers Speaker Setup/ Setting the SubwoofersSetting the AUX Input System AUX Input System Select Adjusting the AUX Volume level AUX Level Setting the AUX Input AUXSetting the Digital Input Digital AUX Setting the AUX Volume Input level AUX in Gain16-EN Before Performing Automatic MeasurementNaming the AUX Input AUX Name 17-EN Setting ImprintEQ18-EN 19-EN Adjusting and Saving the Target CurveTurning ImprintEQ On/Off Saving ImprintEQ Measurement Data on aClick Auto TCR for Shortcut tab in the main menu Adjusting the Time Correction Automatically Auto TCRAdjusting for Road Noise RoadEQ 20-ENClick on or OFF for RoadEQ When you click ON, select the levelTurning RoadEQ On/Off 21-EN22-EN Setting MX Plus Ai-NET ModeSetting MX Plus Standalone Mode 23-EN Setting the Graphic EQDisplaying the data Click Show All Data Click a frequency and drag up or down to adjust the levelTo adjust another channel, repeat Steps 4 through 24-ENClick P.EQ in the main menu Setting the Parametric EQ25-EN Click P.EQ for Shortcut tab in the main menuCrossover X-Over Adjusting X-Over and Switching the PhasesAbout the Crossover X-Over 26-ENArrow indicating the dragging direction appears Click the indicator of Show27-EN 28-EN Adjusting the Time Correction TCRCalculation of time correction Entering the time correctionClick either cm or inch Setting contents 0.00 to 20.00 ms in 0.05 ms stepsSetting contents Inch 29-EN30-EN Setting Euphony EuphonyClick Multi Channel Manager of the Function switching tab Set and adjust 2ch Playback Mode, EUPHONY, Dolby Pro Logic31-EN Using Dolby Pro Logic II Dolby Pro Logic32-EN Multi Channel Function Adjustment ProcedureMulti Channel Setup 33-EN Adjusting the Speaker Volume Level Output LevelAdjusting the Acoustic Image BI Mixing the Low Range Audio for the Rear Rear Mix34-EN Setting the Linear PCM PCM ModeAchieving Powerful High Volume Sound Listening Mode Adjusting the DVD Level DVD Level35-EN Adjusting Subwoofer SubwooferNavigation Audio Volume Adjustment Setting Defeat Defeat Adjusting the MX Plus Level MX Plus SETUP/LEVEL AdjustmentAdjusting Balance Between Left and Right Balance Adjusting Fader Between Front and Rear Fader37-EN Setting the Speaker System System SelectOFF/ON Setting the Speakers Speaker SetupSetting the Subwoofer Output SW Channel 38-EN39-EN Setting the AUX Input System AUX Input SetupSetting the AUX Input AUX 40-EN Setting the Digital Input Digital AUXSetting the AUX Volume Input Level AUX in Gain Adjusting the AUX Volume Level AUX LevelNaming the AUX Input AUX Name Mixing Navi Audio Guidance Navi Mix SetupRotate the Rotary encoder to make adjustment When the setting is complete, pressPress and hold FUNC. for at least 2 seconds Turning ImprintEQ On/Off42-EN Be sure to read before performing the automatic measurementPress the Rotary encoder When Finished appears, press Rotary encoder43-EN 44-EN Setting the MX Plus Ai-NET ModePress twice to go back to the screen for Step Setting the MX Plus Standalone ModeTo adjust another source, press and repeat Steps 8 through 45-ENG-EQ screen is displayed Setting the Equalizer Mode EQ Mode46-EN 47-EN Select the channel you want to adjust by pressing ChannelHz to 200 Hz in 1/6 octave steps 48-ENBand FRONT/REAR/CENTER 1 to Hz to 20kHz in 1/6 octave stepsFront L MID Front R MID 49-ENFront LOW Rear Center SUBWOOFER*1 Front High TCR screen is displayed 50-EN51-EN Setting the Time Correction Adjustment Unit TCR ParameterTo adjust another channel, repeat Steps 9 through 52-EN Setting the 2-Channel Signal Playback Mode ModeSetting Euphony Euphony Dolby Plii screen is displayed Using Dolby Pro Logic II Dolby Plii53-EN Select the channel by pressing Channel Adjusting the Speaker Volume Level Output Level54-EN 55-EN Adjusting the Acoustic Image BIMixing the Low Range Audio for the Rear Rear Mix 56-EN Setting the Linear PCM PCM ModeAchieving Powerful High Volume Sound Listening Mode Adjust the frequency by rotating the Rotary encoder57-EN Adjusting the DVD Level DVD LevelLowering Volume Quickly Mute Turning the Back Light Off Black OUT function58-EN Adjusting the Brightness Level of the Display Dimmer LevelAdjusting the Brightness of the Display Dimmer Press View Switching the DisplayDisplay mode switches for every push 59-ENInput System System Configuration60-EN Output System61-EN Terminology62-EN Indication Commander RUX-C800Case of Difficulty 63-EN SpecificationsComponents Dimensions64-EN