From a PC
5 Click a frequency and drag up or down to adjust the level.
Frequency:
Front/Rear/Center: 20Hz~20kHz (1/3 octave step) (1 to 31 Band)
SubW:20Hz to 160Hz (1/3 octave step) (1 to 10 Band)
Level:
* When ImprintEQ is enabled,
•Mouse trace function
When you click [Mouse Trace OFF], the mouse trace function becomes enabled, and [Mouse Trace OFF] changes to [Mouse Trace ON]. When dragged, the curve (settings) changes in accordance with the movement of the cursor.
To disable the mouse trace function, click the [Mouse Trace ON].
•You can also make adjustments by operating the settings indication area (Frequency, Level).
The current setup value will be displayed at the bottom of the Screen.
Click [ ] and select and click a setup value. You can also use the [Tab], [ ], [ ], [ ], and [ ] keys on your PC to select the setup value.
•After the setting, it is recommended to store the setting contents on the unit. For details, refer to “Storing the Preset Values (Preset Store)” (page 12).
Displaying the data
1 Click [Show All Data].
The setup values for all the channels will be displayed.
6 To adjust another channel, repeat Steps 4 through 5.
•You can listen with Defeat OFF (adjusted setup values) or with Defeat ON (Initial value) to compare, by clicking either [ON] or [OFF] of “Defeat” in the main menu while in the adjustment mode.
•By clicking either [ ] or [ ] of “Mute” while in the adjustment mode, you can mute the selected channel.
7 When setting is complete, click [Close Window].
•To enable this function, Defeat should be is set to ON.
•To restore the channel which is currently being adjusted to the default, click [Ch. Flat]. To restore all the channels to the initial settings, click [All Reset]. Click [OK] when each confirmation message appears.
•When the speaker is set to the “OFF” mode, the graphic equalizer for that speaker cannot be set. Refer to “Setting the Speaker System (Output System Select)” (page 13)/ “Setting the Speakers (Speaker Setup)/Setting the Subwoofers” (page 14).
•Check the playable frequency ranges of the connected speakers before making equalizer adjustments. If the speaker’s playable frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz or 20 Hz band has no effect. Additionally, you may overload and damage the speakers.