Alpine VPA-B211A Getting Started, Feature When Using the Remote Control, Battery Replacement

Getting Started

POWER

SOURCE

MUTE

Operation is carried out from the remote control.

Feature

If the unit is connected to an ALPINE Ai-NET compatible device (DVD/HDD Player, DVD/CD Changer, Adapter for iPod, etc.), operation with the supplied remote control can be carried out. You can also display the screen on the external monitor. If the unit is connected to an ALPINE navigation system, you can display navigation screens on the external monitor. For details on the function of connected devices, refer to the Owner's Manual.

When Using the Remote Control

•Point the remote control at the remote control eye within about 2 meters.

•It may not be possible to operate the remote control if the remote control eye is exposed to direct sunlight.

•The remote control is a small, lightweight precision device. To avoid damage, short battery life, operational errors and poor response, observe the following.

-Do not subject the remote control to excessive shock.

-Do not put in a trouser pocket.

-Keep away from food, moisture and dirt.

-Do not place in direct sunshine.

•Connect the supplied remote control eye. Failing to do so will result in a loss of remote control operation.

Refer to “Connections” (page 22).

•If an ALPINE monitor is connected as the external front monitor, connect the remote control input lead to the remote control output lead of the monitor. In this case, you do not need to connect the supplied remote control eye.

Battery Replacement

Applicable battery: Use two “AAA” sized dry batteries or equivalent.

1 Opening the battery cover

Slide out the battery cover while firmly pressing in the direction of the arrow.

2 Replacing the battery

Insert the batteries, observing the polarities as illustrated.

3 Closing the cover

Slide the cover as illustrated until a click is heard.

5-EN